ASSEMBLY
1 BAGGER SUPPORT ASSEMBLY (See Figures 1A and 1B)
1.Remove rear engine guard (if installed) by removing the six bolts that attach the guard to the frame.
2.Place hitch Part No. 539113090 on the rear of the mower.
ENGINE
GUARD
BOLTS
REAR ENGINE GUARD
ENGINE | ENGINE | |
GUARD | ||
GUARD | ||
BOLTS | ||
BOLTS | ||
|
FIGURE 1A
3.Install two (2) previously removed bolts (539107475) thru rear of the hitch weldment.
4.Secure the sides of the hitch to the frame with four (4) bolts (539107899) and four (4) washers (539990598) two per each side.
2 MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY
(See Figure 2)
NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to mower.
1.Position cover assembly on ground behind mower as shown.
2.Lift and rotate cover to align cover brackets with support assembly tubes.
3.Slide cover assembly down onto the support tubes.
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
BOLT,
WASHER, 1/4
FIGURE 2
HITCH
PREVIOULY REMOVED
HARDWARE
FIGURE 1B
7