Dixon 2560 manual Specification S

	S P E C I F I C A T I O N S
	Model 2560
CHASSIS:	Folded sheet metal and rectangular tube
BODY:	Folded sheet metal
SEAT:	Designed for operator comfort with suspension system and
	padded back and arm rests. Seat is adjustable fore and aft.

MOWER DECK: Deck is made of 10 GA fabricated welded construction with 7 GA reinforcement plates. Three blades combine for a 60" cut

	width. Cut height approximately 1.5" to 5" via 10 position lift
	handle.
BLADE DRIVE:	Electric clutch

DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear BDP

	10A pump and a White CE 14 hydraulic motor.
ENGINE:	25HP Kohler Command, 4-Cycle, V-Configuration, Overhead
	Valve, Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head,
	and Crankcase with Cast Iron Liners, Full Pressure Lubrication/
	Full Flow Filter, Pulse-type Fuel Pump, Fixed Jet Carburetor w/
	Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual
	Element Air Cleaner.
STARTING	Electric by key switch operation with safety interlocks on
SYSTEM:	parking brake and blade drive clutch.
TIRES:	Front 13-5.00x6
	Rear 23-9.50x12
RECOMMENDED	Front	12 lbs.
TIRE PRESSURE: Rear		12 lbs.
CAPACITIES:	Fuel - 11 gallons (approx)
	Hydrostat oil system - 4 qt with in-line 40 micron filter
	Hydrostat oil recommendation, refer to page 31
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	69-1/2"
	Height	43"
	Length	81”
	Weight	916 lbs.

Additional information provided in service instructions under the individual

component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14