Dixon 2560 manual Blade Drive, Mower Deck CUT Height Lift Lever

Page 19

CONTROLS

BLADE DRIVE:

Located on control panel, on operator's right. To engage blades: Pull up on the switch. To disengage blades: Push down.

MOWER DECK CUT HEIGHT LIFT LEVER:

Located to the right and front of the operator.

Controls the cutting height.

Ten positions of adjustment.

Depress trigger and move lever forward to lower deck.

Depress trigger and pull lever back to raise deck.

Note:	Always use high position
	for transport.

19

Image 19

Contents Model Important Read Carefully D E Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationDo not Children Service Service Dixon Limited Warranty Policy Specification S Seat Adjustment Instructions Controls To GO Forward Control LeversHydraulic Drive System Choke Control LeverThrottle Control Lever Parking BrakeMower Deck CUT Height Lift Lever Blade DriveOperation Instructions Before Operating Mower Testing of Safety Interlock Systems Blade Drive Switch Test Electric Clutch Starting Instructions cold engine Starting Instructions engine has been operated Maintain Sharp Blades hroughout The Cutting Season Grass Height and Cutting Suggestions To Free Wheel Machine Unlock Transmission Care and Maintenance G I N E Mower Blades Hydrostatic Transmissions LubricationBelts Electrical Systems Hydrostat OIL Maintenance Procedure Procedure for Raising and Lowering the Deck for Servicing Positionoperation Inshown Mower Mower Shown in Servicing Position Leveling the Deck Model ZTR Standard Service Parts ListTroubleshooting Engine Overheated Page Owner F O R M a TI O N ZTRMowers