OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS (engine has been operated):
1.Move throttle control lever to 1/4 to 1/2 setting.
2.Insert ignition key and turn to “START” position. When engine starts, release ignition key. Key will return to “RUN” position.
3.Move throttle control lever to the wide open or maxi- mum setting for actual operation of the mower deck.
Note: Model ZTR 2560 may require a partial choke setting to start even if the engine has been operated for a period of time.
4.Engine must be operated at wide open or maximum setting to ensure adequate lubrication, cooling and cut quality of the mower deck.
DO NOT operate the engine in an CAUTION enclosed area due to the harmful
exhaust gas produced.
Notes: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blades are engaged.
Safety switches stop engine when operator leaves seat while mower blade is engaged.
Always turn engine off when leaving mower.
25