Troubleshooting

MOWER CUT QUALITY:

There are many variables that can effect the cut quality of any multi-blade mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of the above will generally produce a quality cut.

The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut quality. Your Dixon ZTR Dealer is also available to provide assistance to you.

SITUATION	CAUSES	REMEDY
Poor cut quality	Ground speed	Reduce mowing speed

Poor cut quality	Loose belts	Adjust per operators manual

Poor cut quality	Engine RPM too low	Increase engine RPM to maximum

Poor cut quality	Dull or bent blades	Sharpen or replace as required

Poor cut quality	Unlevel mower deck	Adjust per operators manual

Poor cut quality	Grass build-up under	Clean out underside of mower deck
	mower deck

Poor cut quality	Improper blades	Replace with original equipment
		blades which are designed for the
		Model 5421

Poor cut quality	Uneven tire pressures	Check and adjust as required per
		operators manual

Page 22