Dixon 539 131188 manual Tips for Improved Bagging Operation

Page 12

OPERATION

TIPS FOR IMPROVED BAGGING

OPERATION

Follow the mower operation instructions in your mower operator’s manual.

When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time. The amount collected and the total time of operation may be greater than you will experience with regular use of your grass catcher.

Always run throttle at full speed when bag- ging.

Select a speed low enough to give good mower cutting performance, good quality cut and good bagging performance.

NOTE: It may be necessary to overlap width of cut to suit your conditions.

If grass is extremely tall, it should be mowed twice. The first time relatively high, the second time to desired height.

Use left hand side of mower for trimming.

Plastic trash bags (3.0 mil, 30 gallon) can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full:

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

b.Unlatch and raise cover.

c.Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails.

d.With the container resting on the ground, close and secure the top of the plastic lawn bag.

e.Tip the container on its side and slide the filled bag from the container.

f.Install a new plastic lawn bag with the edges of the bag draped over upper lip of the Container (for replacement bags refer to REPLACEMENT PARTS).

g.Repeat for other containers.

h.Reinstall containers making sure right container overlaps left container at center supports.

i.Close cover and secure latches over center support tubes.

Avoid cutting wet grass or in the morning while the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and adhere to the walls of the flow path causing clogging.

If the grass catcher fails to pick up cut grass or leaves, it is an indication that clogging has occurred in the system or that the grass catcher containers are full.

a.Disengage blades, place motion control levers in neutral position, engage parking brake and stop engine.

-Unlatch and raise cover.

-Slide out containers and dispose of clippings.

-Replace containers, close cover, and latch.

b.Check for clogging.

-Remove all debris in chute.

-Reassemble chutes.

CAUTION

DO NOT operate mower with grass catcher partially installed.

Disengage blades and stop engine before leaving mower seat to empty containers, unclogging chutes, etc.

Close cover before starting.

Disengage mower blades when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

DO NOT attempt to vacuum up cans or other potentially hazardous projectiles.

12

Image 12
Contents Operator Parts Manual Know Your Grass Catcher Table of Contents Safety Rules Safe Operation Practices for RIDE-ON MowersGeneral Operation II. Slope OperationIV. Service III. ChildrenDo not Safe Operation Practices for RIDE-ON Mowers Carton 1 Contents Carton 2 ContentsParts Identification Unpacking InstructionsAssembly 1BAGGER Support Assembly2MOUNTING Cover Assembly to Support Assembly 3CONTAINER Mounting 4BOOSTER Ring5LOWER Chute 6FLEX Hose8FRONT Weights 7UPPER ChuteOperation Tips for Improved Bagging OperationCustomer Responsibilities General RecommendationsBlade Care StorageParts Item P/N QTY Description 1916 QTY Description Torque Specifications HEX Head CAP Screws539-131193 IR 05/07

539 131188 specifications

Dixon 539 131188 is a powerful and versatile device designed to meet the needs of both professionals and enthusiasts in various sectors. Renowned for its cutting-edge technology and remarkable features, this model has quickly gained popularity in the market.

At its core, the Dixon 539 131188 boasts impressive processing capabilities. It is equipped with a high-performance processor that ensures smooth operation, enabling users to execute demanding tasks without any noticeable lag. This processing power makes it suitable for a range of applications, including data analysis, design work, and multimedia production.

One of the standout features of the Dixon 539 131188 is its exceptional display. With vibrant colors and high resolution, the screen offers users an immersive viewing experience, making it ideal for graphic design and detailed visual work. Additionally, the display is designed to minimize glare, providing excellent visibility in various lighting conditions.

The device is also built with advanced connectivity options. It supports multiple wireless protocols, including Wi-Fi and Bluetooth, allowing users to connect effortlessly to other devices and networks. This feature enhances productivity by enabling seamless data transfer and collaboration.

In terms of durability, the Dixon 539 131188 does not disappoint. Constructed with high-quality materials, it is designed to withstand the rigors of daily use, making it a reliable choice for professionals who are always on the go. Its robust build quality ensures that it can handle challenging environments while keeping all components safe.

Another significant aspect of this device is its energy efficiency. With an optimized power management system, the Dixon 539 131188 consumes less energy without compromising performance. This feature not only extends battery life but also contributes to a reduced carbon footprint, making it an environmentally friendly option.

User experience is enhanced further by its intuitive interface, which allows for effortless navigation and access to various features. Whether you are a tech-savvy user or a beginner, the device is designed to cater to different skill levels.

In conclusion, Dixon 539 131188 stands out in the competitive landscape due to its impressive performance, durability, and user-friendly design. It combines advanced technologies with essential characteristics that cater to a diverse audience, making it a valuable addition to any toolkit. Whether for professional use or personal projects, this device promises to deliver quality and efficiency.