Dixon 539 131188 manual Customer Responsibilities, General Recommendations, Blade Care, Storage

Page 13

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any maintenance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your mower operator’s manual.

CAUTION

BEFORE PERFORMING ANY MAINTE- NANCE, SERVICE OR ADJUSTMENTS:

Set parking brake.

Place motion control levers in “NEUTRAL” position.

Place clutch control in “DISENGAGED” position.

Turn ignition key to “OFF” position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

CAUTION

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check compo- nents and replace with manufacturer’s recommended parts, when necessary.

13

Image 13
Contents Operator Parts Manual Know Your Grass Catcher Table of Contents Safe Operation Practices for RIDE-ON Mowers Safety RulesGeneral Operation II. Slope OperationIII. Children IV. ServiceDo not Safe Operation Practices for RIDE-ON Mowers Carton 2 Contents Carton 1 ContentsParts Identification Unpacking Instructions1BAGGER Support Assembly Assembly2MOUNTING Cover Assembly to Support Assembly 4BOOSTER Ring 3CONTAINER Mounting 6FLEX Hose 5LOWER Chute7UPPER Chute 8FRONT WeightsTips for Improved Bagging Operation OperationGeneral Recommendations Customer ResponsibilitiesBlade Care StorageParts Item P/N QTY Description 1916 QTY Description HEX Head CAP Screws Torque Specifications539-131193 IR 05/07