ASSEMBLY
1BAGGER SUPPORT ASSEMBLY
1.Remove the two upper side bolts on the engine guard as illustrated. Set hardware aside for reuse.
2.Attach guard reinforcement to engine guard using hardware removed in Step 1.
3.Attach hanger bracket to guard reinforcement with two 5/16 x ¾ carriage bolts and two 5/16 nyloc nuts. See illustration.
4.After the hanger bracket is attached to the guard reinforcement, two holes will need to be drilled through the engine guard for the matching bottom holes of the hanger bracket.
5.Use the bottom hanger bracket holes as a template to drill the two 11/32 holes.
2MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY
NOTE: For ease of assembly, you may wish assistance from another person for mounting the cover assembly to mower.
1.Position cover assembly on ground behind mower .
2.Lift and rotate cover to align cover bracket with hanger bracket and slide down until secure.
Hanger Bracket
Guard Reinforcement
Engine Guard
Frame Bracket
Hanger
Bracket
Drill two 11/32 holes into engine guard to match these holes
Existing Hardware
8