Dixon 6025 manual Cutter Blade Maintenance

Page 25

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

NOTE: Observe proper blade position prior to removal.

1.Safely raise front of mower.

2.Hold or block blade from turning.

3.Loosen blade nut and remove blade.

4.When replacing blade, tighten blade nut securely. Refer to diagram.

CAUTION

NOTE:

Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

Be sure blade is centered on pilot before tightening nut to 60 ft. lbs. torque.

(No trash guard on 30" machines.)

Page 25

Image 25

Contents ZTR Mowers Dixon INDUSTRIES, INC Important Read CarefullyIndex Safety Safety Symbols General Operation Do not Slope OperationChildren Service Dixon Limited Warranty Policy 3000 & 4000 Series Specifications Shroud Mower Decks Models ZTR 3303 ZTR 3304 ZTR Seat Adjustment InstructionsParking Brake ControlsTo SET Parking Brake Transmission Drive SystemTo GO Backward To GO ForwardTurning BrakingCircuit Breaker Towing Operation InstructionsBefore Operating Mower Engine should not turn over or attempt to start Testing of Safety Interlock SystemsStarting Instructions CUT High MOW Often Mowing with a Mulching AttachmentMaintain Sharp Blades Throughout The Cutting Season Mowing with a Grass Catcher AttachmentGrass Height Suggestions Side Discharge of the ClippingsMaintenance Schedule Care and MaintenanceBattery Cutter Blade Maintenance Deck REMOVAL-MANUAL CLUTCH-MODELS 3303 Belt TensionPlace cut height lever in lowest cut position Deck Removal Electric Clutch Model ZTRFuel Shut OFF Valve Service IntervalsLubrication LocationsOIL Fill Changing the Engine OILRear Chain Adjustment Drive System AdjustmentsWarranty Cleaning the MowerPARTS/SERVICE Wheels and TiresBriggs & Stratton AIR/OIL Filter Part Numbers Standard Service Parts ListBlades BeltsMower CUT Quality TroubleshootingSituation Causes Remedy Drive System Electrical System Page Page Page Date OIL Changed Date Engine Tuned Owner InformationSeries