Dixon 6025 manual Controls, To SET Parking Brake, Transmission Drive System

Page 15

CONTROLS

The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction.

On initial operation, set throttle speed on slow. Operate with mower blade "OFF".

To avoid "over-controlling" the mower, use a light touch on the drive levers.

Slight movements using fingertip control is all that is necessary.

PARKING BRAKE:

The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion.

CAUTION

Engage parking brake before starting engine.

TO SET PARKING BRAKE:

The hand operated parking brake is located on the right end of the mower.

To engage brake, pull lever up (to the rear).

To release brake, move lever forward (down).

NOTE: Always set parking brake before dismounting.

Release parking brake before moving mower.

TRANSMISSION DRIVE SYSTEM:

Allows the mower to turn on its own axis "Zero Turning Radius"

Each lever controls one side of the mower.

NOTE: The pressure required to operate the mower is very light.

Page 15

Image 15

Contents ZTR Mowers Dixon INDUSTRIES, INC Important Read CarefullyIndex Safety Safety Symbols General Operation Do not Slope OperationChildren Service Dixon Limited Warranty Policy 3000 & 4000 Series Specifications Shroud Mower Decks Models ZTR 3303 ZTR 3304 ZTR Seat Adjustment InstructionsTransmission Drive System ControlsParking Brake To SET Parking BrakeBraking To GO ForwardTo GO Backward TurningCircuit Breaker Operation Instructions TowingBefore Operating Mower Engine should not turn over or attempt to start Testing of Safety Interlock SystemsStarting Instructions CUT High MOW Often Mowing with a Mulching AttachmentMaintain Sharp Blades Throughout The Cutting Season Mowing with a Grass Catcher AttachmentGrass Height Suggestions Side Discharge of the ClippingsCare and Maintenance Maintenance ScheduleBattery Cutter Blade Maintenance Deck REMOVAL-MANUAL CLUTCH-MODELS 3303 Belt TensionPlace cut height lever in lowest cut position Deck Removal Electric Clutch Model ZTRLocations Service IntervalsFuel Shut OFF Valve LubricationOIL Fill Changing the Engine OILRear Chain Adjustment Drive System AdjustmentsWheels and Tires Cleaning the MowerWarranty PARTS/SERVICEBelts Standard Service Parts ListBriggs & Stratton AIR/OIL Filter Part Numbers BladesTroubleshooting Mower CUT QualitySituation Causes Remedy Drive System Electrical System Page Page Page Date OIL Changed Date Engine Tuned Owner InformationSeries