CARE AND MAINTENANCE
CAUTION | HOT oil may cause burns. |
Allow engine to cool before draining oil. |
CHANGING THE ENGINE OIL:
1.The "Dapco" oil drain valve is located on the left side of the engine crankcase.
2.Place a suitable container under the drain valve. The fitting of a short piece of hose will help direct the oil.
3.To drain turn hex head valve stem counter clockwise with 10mm wrench or socket. Open to full open (approximately 7 turns).
4.After engine is drained tighten hex stem.
NOTE: Refer to engine manufacturer's recommendations for frequency of oil changes.
Hex Head Valve Stem 
OIL FILL:
1.Drain oil.
2.Clean any spilled oil from engine and chassis.
3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Page 29