|
| SPECIFICATIONS |
| 8000 Series (Diesel Version) | |
CHASSIS: | 11 GA - rectangular tube, 7 GA reinforcement | |
SEAT: | Designed for operator comfort with padded back & arm rests. | |
| Seat is adjustable fore & aft. Mounted on operator suspension | |
| system with damper. | |
MOWER DECK: | 2 decks are available. Both are made of 10 GA fabricated welded | |
| construction with 1/4” reinforcement plate. 3 blades combine for | |
| either a 60” or 72” cut width. Deep deck with discharge tunnel. | |
| Cut height approximately 1.5” to 6” via 10 position lift handle. | |
BLADE DRIVE: | “V” belt with electric clutch | |
DRIVE SYSTEM: | Each rear wheel is independently driven by a | |
| pump and White CE wheel motor. | |
ENGINE: | 26 HP Briggs & Stratton Vanguard 950D, 3 cylinder | |
| cooled, diesel, horizontal shaft, pressure feed lubrication with spin- | |
| on oil filter, fuel filter with primer pump and water separator, | |
| paper element with cyclone | |
STARTING | Electric by key switch operation with safety interlocks on parking | |
SYSTEM: | brake, blade drive clutch and control levers. | |
TIRES: | Front | |
| Rear | |
RECOMMENDED | Front | |
TIRE PRESSURE: | Rear | |
CAPACITIES: | Fuel - 11 gallons (approximate) | |
| Hydrostat oil system - 4 quart with | |
| Hydrostat oil recommendation - SAE 20W50 motor oil | |
| Engine - 3.5 quart CF/CF4 10W30 motor oil | |
| Coolant capacity - 2 gallons 50/50 mix | |
DIMENSIONS: | Width | 73.5” (60” Deck), 85.5” (72” Deck) |
| Height | 54” |
| Length | 93” |
| Weight | 1330 lbs (60” Deck), 1364 lbs. (72” Deck) |
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
13