Dixon 13282-0801 manual Headlight Adjustment

Page 33

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT:

1.Loosen the 1/2” retaining nut underneath the headlight and slide the headlight forward out of the fuel tank.

2.Loosen the 1/2” nut on the “U” shaped

holding bracket and swivel the headlight vertically to adjust the height of the beam. Tighten the bracket nut.

3.Replace headlight in fuel tank.

4.Swivel the headlight horizontally to illuminate the desired area and tighten the headlight retaining nut.

33

Image 33

Contents Manual Important Read Carefully Index Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Diesel Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat ControlsIgnition Switch Mower Blade SwitchThrottle Control Lever Circuit BreakerControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsMowing Instructions Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetSprings To Lift SeatTo Free Wheel Machine Towing Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment Hydrostatic Pumps Hydrostat Drive BeltTo remove hydrostat pump drive belt To install hydrostat pump drive belt Hydrostat Drive Belt Replacement ProcedureSteering Control Adjustments To adjust neutralTo adjust neutral springs To adjust steering control levers Steering Control AdjustmentsTo adjust for straight forward tracking To adjust In position of the steering controlsLeveling the Deck Troubleshooting Engine Overheated Model ZTR 8026D Briggs & Stratton AIR and OIL Filter Part NumbersModel ZTR 8026D 26 HP Owner Information ZTRMowers