Dixon 13282-0801 Hydrostat Drive Belt Replacement Procedure, To install hydrostat pump drive belt

Page 35

CARE AND MAINTENANCE

HYDROSTAT DRIVE BELT

REPLACEMENT PROCEDURE:

To install hydrostat pump drive belt:

1.Rotate the spring loaded take-up idler towards the left hand hydro pump.

2.Install belt per diagram.

3.Install double u-joint and tighten flange bolts (tighten to 14 ft. lbs.).

4.Install radiator and mounting hardware.

5.Attach radiator hoses and refill cooling system.

35

Image 35

Contents Manual Important Read Carefully Index Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Diesel Version SpecificationsControl Levers ControlsMower Deck Lift Parking BrakeSeat ControlsCircuit Breaker Mower Blade SwitchIgnition Switch Throttle Control LeverControls Before Operating Mower Operation InstructionsTesting of Safety Interlock Systems Interlock Switch Test Stopping Instructions Starting InstructionsMowing Instructions Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetSprings To Lift SeatTo Free Wheel Machine Towing Maintenance Schedule Care and MaintenanceTires BatteryEngine Belts Mower BladesLubrication Dirt or water in oil can ruin Hydrostatic transmissions Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Headlight Adjustment To remove hydrostat pump drive belt Hydrostatic PumpsHydrostat Drive Belt To install hydrostat pump drive belt Hydrostat Drive Belt Replacement ProcedureTo adjust neutral springs Steering Control AdjustmentsTo adjust neutral To adjust steering control levers Steering Control AdjustmentsTo adjust for straight forward tracking To adjust In position of the steering controlsLeveling the Deck Troubleshooting Engine Overheated Model ZTR 8026D 26 HP Model ZTR 8026DBriggs & Stratton AIR and OIL Filter Part Numbers Owner Information ZTRMowers