ASSEMBLY
3CONTAINER MOUNTING
1.Install container, centering between support tubes.
NOTE: One container should always overlap the other container at supports.
2.Close cover and lock latch handles over center support tubes.
4UPPER CHUTE
1.Attached flex tube to blower and secure with the hose clamp.
2.Slide opposite flex hose end into upper chute.
3.Push upper chute through the gasketed opening in the cover assembly.
4.Rotate flex tube and upper chute so that the chute opening is downwards toward the container bags.
Cover Latch | Cover Gasket |
Handle |
|
Container Bags | Rotate Upper Chute |
| |
| to point downwards |
| towards bags |
Support
Tubes
WARNING
DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or dam- aged. Use only a recommended replace- ment container.
9