Dixon 11249-0605 manual Mower Deck CUT Height Lift Lever

Page 21

CONTROLS

MOWER DECK CUT HEIGHT LIFT LEVER:

Located to the right and front of the operator.

Controls the cutting height.

17 positions of adjustment

Depress trigger and move lever forward to lower deck.

Pull lever back to raise deck.

Set desired cut height with pin.

Use foot pedal to assist with raising and lowering deck.

Note: Always use high position for transport.

The two holes at the front of the quadrant are for 1-1/2” and 1-3/4” cut heights.

The four holes along the bottom of the quadrant are for one inch cut height increments (2” to 5”).

The second row of holes from the bottom are for an additional 1/4” of cut height over its mating one inch increment (2-1/4” to 5-1/4”).

The third row of holes from the bottom are for an additional 1/2” of cut height over its mating one inch increment (2-1/2” to 5-1/2”).

The remaining three holes are for an additional 3/4” of cut height over their mating one inch increments (2-3/4” to 4-3/4”).

21

Image 21
Contents Black Bear ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Black Bear SpecificationsSeat Adjustment Instructions Control Levers ControlsTo SET Parking Brake Parking BrakeMower Deck CUT Height Lift Lever Blade Drive Circuit BreakerChoke and Throttle Control Lever Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Blades Standard Service Parts ListBelts Engine AIR and OIL FiltersDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC