Dixon 11249-0605 manual Grass Height & Cutting Suggestions

Page 32

OPERATION INSTRUCTIONS

GRASS HEIGHT & CUTTING SUGGESTIONS:

Do not attempt to cut grass when it is wet.

If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

Keep the underside of the mower deck clean.

Maintain sharp blades throughout the cutting season.

As a rule of thumb, never cut off more than 1/3 of the total grass blade length. Correct mowing height can reduce weeds and disease by 50% to 80%.

The following grass cut heights are based on adequate moisture conditions and normal thatch build-up in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types

Best Cut Heights

Bermudagrass

1 - 2”

Bluegrass

2 - 3”

Buffalograss

11/2 -3”

Ryegrass

2 - 3”

Tall Fescue

3-31/2

Zoysiagrass

1 - 3”

32

Image 32
Contents Black Bear ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Specifications Black BearSeat Adjustment Instructions Controls Control LeversParking Brake To SET Parking BrakeMower Deck CUT Height Lift Lever Choke and Throttle Control Lever Blade DriveCircuit Breaker Operation Instructions Before Operating MowerStarting Instructions Testing of Safety Interlock Systems Parking Brake Switch TestEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructionsSide Discharge of the Clippings Grass Height & Cutting Suggestions Towing Trailers and Other Attachments To Free Wheel Machine Unlock TransmissionCare and Maintenance Maintenance ScheduleCutter Blade Maintenance Battery EngineTires LubricationBelts Belt TensionChanging the Engine OIL OIL Fill OIL FiltersHydrostatic Transmission Fluid Filter Service Recommended FluidHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Cleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsMower Deck Removal Troubleshooting Engine WON’T Turn OverMower Loses Power or Transmission Overheats Standard Service Parts List BladesBelts Engine AIR and OIL FiltersOWNER’S Information Date OIL ChangedDixon INDUSTRIES, INC