Dixon 11249-0605 manual Cutter Blade Maintenance

Page 35

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

CAUTION Stop engine and remove ignition key for safety. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

Check sharpness of mower blades after every 10 hours of operation. Observe proper blade position prior to removal.

1. Safely raise front of mower.

2. Hold or block blade from turning.

3. Loosen blade bolt and remove blade.

4. When replacing blade, tighten blade bolt securely. Refer to diagram. Tighten blade bolt to 60 ft. lbs.

Blades should be discarded when worn excessively.

 

DANGEROUS!

 

DO NOT USE

New Blade

BLADE IN THIS

CONDITION!

 

 

When notch starts,

 

discard blade

35

Image 35
Contents Black Bear ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Black Bear SpecificationsSeat Adjustment Instructions Control Levers ControlsTo SET Parking Brake Parking BrakeMower Deck CUT Height Lift Lever Choke and Throttle Control Lever Blade DriveCircuit Breaker Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Engine AIR and OIL Filters Standard Service Parts ListBlades BeltsDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC