Dixon 11249-0605 manual Hydrostat OIL Maintenance Procedure

Page 42

CARE AND MAINTENANCE

HYDROSTAT OIL MAINTENANCE PROCEDURE:

Check the oil level in hydrostatic transmisison oil reservoir after every 25 hours of usage. Clean the oil reservoir cap and the area around it prior to removal. Check the oil level. Oil should be approximately 1/4” below top of oil tank baffle. Replenish as needed with Dixon BlueTM 15W-50 Synthethic Hydrostatic Fluid or a quality SAE 20W-50 motor oil. DO NOT OVERFILL. When checking the oil level, be very careful to keep the reservoir clean.

Change the oil in the reservoir and hydrostat transmission oil filter after the first 100 hours of use. Then every 500 hours after that. Remove the filter and be sure all oil has drained from the reservoir. Replace with a new OEM filter (P/N 18045) and Dixon BlueTM 15W-50 Synthetic Hydrostatic Fluid or a quality SAE 20W-50 motor oil.

Please dispose of used oil at proper collection centers.

Protect your environment

42

Image 42
Contents Black Bear ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Specifications Black BearSeat Adjustment Instructions Controls Control LeversParking Brake To SET Parking BrakeMower Deck CUT Height Lift Lever Blade Drive Circuit BreakerChoke and Throttle Control Lever Operation Instructions Before Operating MowerStarting Instructions Testing of Safety Interlock Systems Parking Brake Switch TestEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructionsSide Discharge of the Clippings Grass Height & Cutting Suggestions Towing Trailers and Other Attachments To Free Wheel Machine Unlock TransmissionCare and Maintenance Maintenance ScheduleCutter Blade Maintenance Battery EngineTires LubricationBelts Belt TensionChanging the Engine OIL OIL Fill OIL FiltersHydrostatic Transmission Fluid Filter Service Recommended FluidHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsMower Deck Removal Troubleshooting Engine WON’T Turn OverMower Loses Power or Transmission Overheats Belts Standard Service Parts ListBlades Engine AIR and OIL FiltersOWNER’S Information Date OIL ChangedDixon INDUSTRIES, INC