Dixon 11249-106 manual Mower Deck CUT Height Lift Lever

Page 21

CONTROLS

MOWER DECK CUT HEIGHT LIFT LEVER:

•Located to the right and front of the operator.

•Controls the cutting height.

•17 positions of adjustment

•Depress trigger and move lever forward to lower deck.

•Pull lever back to raise deck.

•Set desired cut height with pin.

•Use foot pedal to assist with raising and lowering deck.

Note: Always use high position for transport.

The two holes at the front of the quadrant are for 1-1/2” and 1-3/4” cut heights.

The four holes along the bottom of the quadrant are for one inch cut height increments (2” to 5”).

The second row of holes from the bottom are for an additional 1/4” of cut height over its mating one inch increment (2-1/4” to 5-1/4”).

The third row of holes from the bottom are for an additional 1/2” of cut height over its mating one inch increment (2-1/2” to 5-1/2”).

The remaining three holes are for an additional 3/4” of cut height over their mating one inch increments (2-3/4” to 4-3/4”).

Image 21

Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Black Bear SpecificationsSeat Adjustment Instructions Control Levers ControlsTo SET Parking Brake Parking BrakeMower Deck CUT Height Lift Lever Blade Drive Circuit BreakerChoke and Throttle Control Lever Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Black Bear Blades Standard Service Parts ListBelts Engine AIR and OIL FiltersDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC

11249-106 specifications

Dixon 11249-106 is an innovative product designed to meet the demands of various industrial applications. Known for its high-quality engineering and performance, this tool has gained recognition in multiple sectors, including manufacturing, construction, and automotive. The key features of the Dixon 11249-106 include its robust construction, versatility, and user-friendly design, making it an ideal choice for both professionals and DIY enthusiasts.

One of the main highlights of the Dixon 11249-106 is its durable materials. Constructed from high-strength materials, this tool is designed to withstand the rigors of daily use in challenging environments. Its corrosion-resistant finish ensures longevity, while the ergonomic design reduces hand fatigue during extended use. This makes it an essential addition to any toolkit, enhancing productivity without compromising on comfort.

Technologically, the Dixon 11249-106 incorporates advancements that boost its efficiency. For instance, it features precision engineering that allows for accurate and consistent performance, which is crucial in tasks that require high levels of precision. Additionally, the tool is compatible with a range of attachments and accessories, providing users with the flexibility to tackle various job requirements effectively.

Another notable characteristic of the Dixon 11249-106 is its ease of use. The tool is designed with intuitive controls, enabling operators to switch between functions seamlessly. This user-friendly approach not only simplifies operation but also minimizes the learning curve for new users, allowing them to get up to speed quickly. Moreover, it is lightweight yet sturdy, ensuring that users can maneuver it easily without compromising on control.

In terms of safety, the Dixon 11249-106 comes equipped with several features that promote a secure working environment. Anti-slip grips and protective guards are integrated into its design, ensuring that users can operate the tool safely even in slippery or hazardous conditions.

In summary, the Dixon 11249-106 is a highly effective tool that combines strength, versatility, and ease of use. With its innovative technologies and thoughtful design, it stands out in the market, catering to the needs of professionals and hobbyists alike. Whether for heavy-duty projects or intricate tasks, the Dixon 11249-106 offers reliable performance and durability that users can trust.