4. To program multiple tracks, repeat the steps 2. and 3. until all the tracks to be played are programmed.
5. Press 3 button on the unit or remote controller to start the program play.
TO RETURN TO NORMAL PLAYBACK
CLEAR PROGRAMMED TRACKS
TO CLEAR ONE TRACK AT A TIME
CLEAR
DISPLAY WINDOW BRIGHTNESS
ADJUSTMENT
DIMMER
Each time DIMMER button on the remote controller is pressed, the display window brightness changes as follows:
ENGLISH
ADVANCED OPERATIONS
NAMES AND | FUNCTIONS |
BASIC | CONNECTIONS |
PROGRAM
During Program mode, press CLEAR button on the remote controller to clear the programmed tracks one by one from the last track.
Bright | Dim | Dark |
BASIC OPERATIONS |
To return to normal playback during program play, | TO CLEAR WHOLE PROGRAM |
| |
press PROGRAM button. | 0 |
At this time, the “PROGRAM” indication disappears |
|
and normal playback starts from the track being |
|
played. |
|
CHECK THE PROGRAM
0
RECALL
PROGRAM
ADVANCED | CONNECTIONS |
ADVANCED | OPERATIONS |
During Program mode (the “PROGRAM” indication is lit), press RECALL button on the remote controller.
•Each time RECALL button is pressed the programmed tracks are displayed one by one.
To clear the whole program, press PROGRAM button on the unit or remote controller during Program mode so that the PROGRAM indication disappears.
Or press 0 button and open the disc tray to clear the whole program.
•When the unit switches to standby or power off, the programs are all erased.
TROUBLESHOOTING |
OTHERS |
11