Cleaning of Equipment External Surfaces, Repairs

ENGLISH

FUNCTIONS	NAMES AND
CONNECTIONS	BASIC
OPERATIONS	BASIC
CONNECTIONS	ADVANCED
OPERATIONS	ADVANCED
TROUBLESHOOTING
OTHERS

OTHERS

NOTES ABOUT THE DISCS

*Handle the discs carefully so as not to scratch their signal surfaces.

*Keep the signal surfaces of the discs

clean at all times.

When cleaning the signal surfaces of discs, always be sure to use the special cleaner and wipe the surfaces in the directions shown in the figure below.

• Wipe the surface	• Do not wipe the surface
radially from the	in the circumferential
center.	direction.

* Do not attach pieces of paper or stickers to the label surfaces of the discs.

When a disc has a piece of plastic tape or rental CD label with paste protruding from the edge or when a disc still bears traces of sticky tape or adhesive labels, do not attempt to play it. If such a disc is played on the CD player, you may ﬁnd that you cannot remove it or that some other kind of malfunctioning may occur.

* Do not use discs which come in special shapes.

Do not attempt to play heart-shaped or octagonal discs or discs with any other special shapes. You may find that you cannot remove them or that some other kind of malfunctioning may occur in the player.

*Use discs which satisfy the CD standards such as those with the “CD logo”, “

” or “” mark on their disc label

TEXT

surfaces.

No guarantees are made for playback if discs which do not satisfy the appropriate CD standards are used.

Similarly, no guarantees are made for their sound quality even if it is possible to play such discs.

*To protect your discs from damage, avoid placing them in the following locations.

•Where they will be exposed to direct sunlight or where they will be close to a heater or other heat- radiating appliance

•Where the humidity level is high or it is very dusty

•Near a window or other such location where they may be exposed to rain

*Get into the habit of putting the discs back in their cases after use.

CLEANING OF EQUIPMENT

EXTERNAL SURFACES

The exterior ﬁnish of your unit will last indeﬁnitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the ﬁnish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft, lint-free cloth.

If the equipment becomes heavily soiled:

•Dilute some washing up liquid in water, in a ratio of one part detergent to six parts water.

•Dip a soft, lint free in the solution and wring the it is damp.

•Wipe the equipment with the damp cloth.

•Dry the equipment by wiping it with a dry cloth.

REPAIRS

Only the most competent and qualified service technicians should be allowed to service the factory-trained warranty station personnel have the knowledge and special facilities needed for repair and calibration of this precision equipment. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation.

In the event of difﬁculty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment’s behaviour.