BASIC OPERATIONS
NORMAL PLAYBACK
1. | 3. | 5. 2. 4. |
1.
2. 4.
3. 
5.
Track numbers
Total number of tracks | Total playing time |
1. Press the POWER button on the unit or on the remote controller to turn on the power.
2. Press 0 button on the unit or remote controller to open the disc tray. Hold the edge of the disc and place on the tray.
•Do not touch the signal surface of a disc.
•To play a single CD (8 cm), place the disc with the indentation at the center of the tray.
3.To set multiple discs, press DISC SKIP button on the unit or DISC 3 or 4 button on the remote controller. With the turn table on the tray rotating, set the disc one by one.
4.Press 0 button on the unit or remote controller to close the disc tray.
5.When 3 button on the unit or remote controller is pressed, playback starts from the first track.
•At this time, “3” lights up on the display window.
•All discs are played
(example) To start playback from the disc 2
Disc 2/first track →.....→ last track
→Disc 3/first track →.....→ last track
→Disc 4/first track →.....→ last track
→Disc 5/first track →.....→ last track
→Disc 1/first track →.....→ last track
→Stop
Caution
•Place a disc on each tray correctly. If not, the unit cannot be operated and discs may be damaged.
•Be careful not to have your finger caught when you close the tray.
If the finger is caught, press 0 button to open the tray.
•Do not insert a disc in the way shown as the arrow.
•Do not place any other media other than a disc on the tray.
•Do not pile up discs on a tray. Do not place more than two disc on a tray.
•Do not force to open/close the tray. Always use 0 button to open/close the tray.
•While the tray is open and rotating, do not touch or stop the tray with fingers.
PAUSE PLAYBACK
Pressing 8 button on the unit or remote controller pauses the play.
•At this time, “8” lights up on the display window.
•To restart the playback, press 3 button on the unit or remote controller.
•Pressing 8 button on the unit or remote controller again while pausing restarts the playback.
STOP PLAYBACK
Pressing 7 button on the unit or remote controller stops the playback.
CHANGE DISCS WHILE PLAYING
You can change other discs not being played while playing a disc.
DISC SKIP | 0 |
0
DISC 3, 4
ENGLISH
•While disc 1 is playing, press 0 button to open the tray and change disc 2, 3, and 4.
To change disc 5, press DISC SKIP button on the unit or DISC 3 or 4 button on the remote controller to rotate the turntable on the tray, then change the disc.
•After changing the disc, make sure to press 0 button to close the disc tray.
qt
wr
e
q…Disc 1 tray | r…Disc 4 tray |
w…Disc 2 tray | t…Disc 5 tray |
e…Disc 3 tray |
|
NAMES AND | FUNCTIONS |
BASIC | CONNECTIONS |
BASIC | OPERATIONS |
ADVANCED | CONNECTIONS |
ADVANCED | OPERATIONS |
TROUBLESHOOTING | |
OTHERS | |
7