HydroSport
Connecting the HydroSport Body Belt
The adjustable HydroSport Body Belt is another exercise tool available for your convenience in creating a “tailored” exercise program.
Simply snap a HydroSport Tensor Cord into one of the two
other end of the Tensor Cord to a Butterfly Top that has been installed into an OptiMount. Then wrap the belt around your waist, snap the buckle into place, and adjust the belt to fit you comfortably. Do not make it too tight, as it could interfere with your ability for an emergency
Do not make the HydroSport belt too tight, as it could interfere with your ability to remove the belt in case of an emergency, or adversely impact on your exercise routine.
Never exercise alone. Always have someone close by in case of fatigue, accident or injury. When you are exercising, or simply relaxing, in “water” the risks of injury while being alone are increased. If you become incapacitated for any reason, and do not have someone available to help, you could drown.
Do NOT change your approved exercise routine without first consulting with your physician. Your physician should approve any exercise program you use. Likewise, any modifications to the program should also be approved before you implement the changes.
Always wear shatterproof safety glasses whenever using HydroSport equipment or other
Do not allow your Tensor Cords to remain in direct sunlight for extended periods of time. Exposure to direct sunlight for extended periods of time can cause the Tensor Cords to deteriorate. Deteriorated, or damaged, Tensor Cords could break and cause injury if the break should occur during use.
Be sure to examine your Tensor Cords for damage or deterioration prior to each use.
Do not use damaged or deteriorated Tensor Cords.
You may connect additional Tensor Cord(s)s to the Belt to increase resistance.
29