Aquatic Fitness System
2005 Owner’s Manual
Temperature Unit:
Program the Temperature Unit by pressing the PROGRAM button a 5th time. The current Temperature Unit will be visible in the LED Digital Display Window.
To adjust the Temperature Unit used to measure spa water temperature, simply use the UP or DOWN Buttons to select between Fahrenheit (ºF) and Celsius (ºC). The factory default setting is Fahrenheit.
Exit the Programming Sequence by pressing the PROGRAM
Button a 6th time. All changes will be saved.
If you do not proceed with the programming within 60 seconds, the spa will automatically exit the programming sequence and revert to your previous settings. Any programming changes made up to that point would be saved.
Heat Indicator Light
Heat Indicator Light:
This Light is illuminated whenever the heater is on. Additionally, the HEAT Icon will also be displayed in the upper left corner of the LED Digital Display Window.
Dimension One Spas Icon (Logo) Button
Dimension One Spas ICON (Logo)®: The time of day can be viewed by pushing the Dimension One Spas ICON logo on the far right of the control. If no other button is pushed within 5 seconds, the display will revert to the spa water temperature reading.
The
Button can change the clock.
26