Dimension One Spas 01513-192 manual AquaFitDual Temp Spa-Side, Do not enter spa water. The water

Aquatic Fitness System

2005 Owner’s Manual

AquaFit™Dual Temp (Spa-Side)

Symptom		Problem		Corrective Action
		“OH” on LED Digital Display
		Window		1. Remove the cover and
				allow the water to cool.
		High Temperature Condition:		2. Reset the power to the spa
		Do not enter spa water. The water		by resetting the GFCI
		temperature is above acceptable limits.		breaker.
		The water temperature has reached		No further action is required
		110°F (≅43.3°C.). The system will shut
		down.		unless the water temperature
				fails to return to acceptable
				levels – in which case, call your
				dealer for service.
		3 Flashing Lights AND
		“OH” on LED Digital Display
		Window		Call your dealer for service.
		High Limit Condition:
		Do not enter spa water. The water
		temperature is above acceptable limits.
		The water temperature has reached
		118°F (≅47.8°C.). The system will shut
		down.
		3 Flashing Lights
				If the error is not resolved after
		System Error:		resetting the spa, call your dealer
				for service.
	1.		Check the water level
	2.		Clean the filters.
		3. If the problem persists, reset
			the power to the spa by
			resetting the GFCI breaker.
		Temperature Probe Failure:		Call the dealer for service.
		If the LED Digital Display shows
		32°F (≅0.0°C) or 136°F (≅57.8°C),
		you have an open temperature
		sensor. The heater is
		deactivated.

42