Dimension One Spas 01513-192 manual Light Bulb Replacement, AquaFit and AquaPro

Aquatic Fitness System

2005 Owner’s Manual

AquaFit™ and AquaPro™

Always turn off the power to the Aquatic Fitness System before cleaning the filter elements. Refer to the filter manufacturer’s manual for detailed instructions on removing the filter.

It is recommended that filters be cleaned every month as preventative maintenance. You should clean the cartridge with a high-pressure garden hose. Every other cleaning, you should also soak the cartridge in a filter cleaning solution, rinse it thoroughly, and then reinstall it. After cleaning, be sure to run the pump(s) for a few minutes at high speed, and then return to the heating mode.

Be sure the slice valves and the shut off valve are closed before changing or cleaning your Aquatic Fitness System filter.

Light Bulb Replacement

All systems are equipped with Dynamic LED Lights. To change the light:

1.Turn the power off and drain the system below the level of the light.

2.Using the special tool provided in the owner’s manual packet, unscrew the cover for the light housing.

3.Remove the old light and install the new light.

4.Use the special tool to replace the cover for the light housing.

5.Check to ensure proper operation of the new light before refilling the system.

Do not attempt to remove the light housing cover without lowering the water level below the light housing cover.

Do not attempt to remove the light housing cover without the special tool. If you are not able to locate it, contact your Dimension One Spas Dealer to have one sent.

Be sure the O-ring is not damaged and is properly in place when replacing the lens. Contact your dealer if a replacement O-ring is needed.

30