Krell Industries KCT Main Zone and Zone 2 Operation, To turn off this option, Main Zone Only

Page 26

MAIN ZONE AND ZONE 2 OPERATION

The KCT preamplifier’s two-zone operation offers a number of listening options.

Play Both Zones

This option allows you to play one input device through both zones or play a different device through each zone simultaneously, and adjust volume levels for each zone.

1.Press the power button (1) or power key (32) to switch the KCT from the stand-by to the operational mode. The front panel display (13) shows the main zone is active, the currently selected input, and main zone volume level.

2.Press the input select button (6) or key (39) to select the device you wish to play in the main zone.

3.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust main zone volume to the desired level.

4.Press the zone button (10) or Z2 key (38) to select zone 2. The front panel display shows zone 2 is active, the currently selected input, and zone 2 volume level.

5.Press the input select button (6) or key (39) to choose another device to play in zone 2. You can choose the same input device to play in both zones, if you wish.

6.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust zone 2 volume to the desired level.

To turn off this option:

1.Press the Z2 key (38) to select zone 2.

2.Press the power button (1) or power key (32) once. This turns off zone 2 and switches you to the main zone.

3.Press the power button or key again to turn off the main zone and return to the stand- by mode.

Play Either Zone

This option allows you to play an input device in either the main zone or zone 2.

Main Zone Only

1.Press the power button (1) or power key (32) to switch the KCT from the stand-by to the operational mode. The front panel display shows the main zone is active, the currently selected input, and the main zone volume level.

2.Press the input select button (6) or key (39) to select the device you wish to play in the main zone.

3.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust the main zone volume to the desired level.

4.Press the main zone key (37) again. The preamplifier returns to the stand-by mode.

22

Krell Current Tunnel

Image 26
Contents Instructions for Use Owner’s Reference Krell Current Tunnel Cast PreamplifierKCT Contents List of Illustrations Krell Link IntroductionDefinition of Terms Theater ThroughputStand-by Mode Krell Current Audio Signal Transmission CastOperational Mode Krell Current ModeCast a New Approach How Cast and Krell Current Mode InteractRevolutionary Krell Cast Technology Cast BasicsBest Musical Performance Unpacking PlacementAC Power Guidelines Operating the KCT Preamplifier Connecting the KCT PreamplifierQuick Start If you wish to turn your system off KCT Front Panel Front Panel Description PowerRemote Control Functions Preamplifier FunctionsMenu Functions DisplayLevel Control KCT Back Panel Tape Output Back Panel DescriptionInputs Main Zone OutputsPhono Stage Connector Back Panel Remote ConnectionsKCT Remote Control Amplifier Functions Remote Control DescriptionBattery Installation and Removal Input Select Keys Main Zone Key38 Z2 Key Tape KeyCompact Disc Functions Connecting the KCT Preamplifier to Your System Input and Output ConnectionsKrell Link Operation Connecting Components through Krell LinkKrell Link Connections and Operation Tape Input and Output Operating the KCT Preamplifier ON/OFF and STAND-BY OperationMain Zone Only Main Zone and Zone 2 OperationTo turn off this option Zone 2 Only Play and RecordTo stop recording Troubleshooting System Noise Z1 and Z2 Balance To adjust the fixed offset for zoneCustomizing the KCT Preamplifier Input Name MenuInput Level Trim Input Balance TrimTheater Throughput Mode Mute Menu Output Trigger SetupBrightness Tape Output Menu AC Mains MenuInput Trigger Setup Program Remote MenuSetup Memory Krell LinkTrigger Delay Setup Exit MenuQuestions and Answers Warranty Return Authorization Procedure Specifications Tape LoopTHD+Noise Page Krell Industries, Inc Connair Road Orange, CT 06477-3650 USA