SETUP MEMORY
This option allows you to save or recall new settings, or reset all settings to the factory defaults. Remember, to exit the setup memory without altering the settings, select exit and press the enter button (16) or key (42). You return to the main menu.
1.Press the menu button (15) or key (41) to access the main menu.
2.Use the level control knob (14) or level keys (44) to select SETUP MEMORY.
3.Press the enter button (16) or key (42). The front panel display (13) shows SAVE ALL SETTINGS (the default).
4.Use the level control knob (14) or level keys (44) to select the preferred setup
memory (SAVE ALL SETTINGS, RECALL ALL SETTINGS, FACTORY SETTINGS).
5.Press the enter button (16) or key (42). The front panel display (13) shows PLEASE WAIT. The KCT switches into the
6.Press the power button (1) or key (32) to return the KCT to the operational mode. The settings you selected are stored.
KRELL LINK
This option allows you to customize the operation of the KCT and Krell amplifiers connected with Krell Link. See Krell Link Connections and Operation, on page 19.
1.Press the menu button (15) or key (41) to access the main menu.
2.Use the level control knob (14) or level keys (44) to select KRELL LINK.
3.Press the enter button (16) or key (42). The front panel display (13) shows DISABLED (the default).
4.Use the level control knob (14) or level keys (44) to select the preferred Krell Link
option (DISABLED, ENABLED, AUTO ON).
Following are the definition of terms used with Krell Link.
Disabled. The amplifiers connected through Krell Link remain off when the KCT is switched to the operational mode, for example, if you wish to record without listening to music. The amplifiers can not be powered on when this option is engaged.
Enabled. The amplifiers connected through Krell Link remain off when the KCT is switched to the operational mode. To turn the amplifiers on and off, use the amp pwr key (33) on the KCT remote control.
Auto On. The amplifiers connected through Krell Link automatically power on when you switch the KCT to the operational mode and power off when you turn the KCT off.
5.Press the enter button (16) or key (42) to return to the main menu or press the menu button (15) or key (41) to exit the menu mode.
32 | Krell Current Tunnel |