Safety, Engine Starting Procedures | Classen SC-18, SC-24, SC-20

SAFETY

HANDLE FUEL SAFELY - AVOID FIRES

Handle gasoline with care; it is highly flammable. Use an approved gasoline container.

Fill the fuel tank outdoors.

DO NOT fill tank completely full.

DO NOT smoke while you fill fuel tank.

DO NOT remove gas cap if engine is running.

READ SAFETY SIGNS

Carefully read and follow all caution stickers.

WARNING

ALL GUARDS MUST BE IN PLACE

WHILE MACHINE IS IN OPERATION

WARNING

KEEP HANDS & FEET AWAY

FROM MOVING PARTS

OPERATE SAFELY

Carefully read this manual and operate sod cutter correctly.

PROTECT CHILDREN

Keep children and pets out of the area where you are cutting sod.

AVOID TIPPING

Make sure you do not get too close to sharp drop-offs to avoid tipping sod cutter over.

OPERATE SAFELY ON SLOPES

You may cut sod any direction on slopes, however, make sure you do this carefully. Cutting on slopes can be dangerous. To avoid any accidents, make sure to leave yourself room to correct the problem if one arises. Always park your sod cutter on level ground.

PRACTICE SAFE MAINTENANCE

Keep all machine parts in good condition and fastened in place. Fix damages immediately. Replace worn or broken parts. Whenever you work on the sod cutter, disconnect spark plug wire.

START ENGINE SAFELY

Make sure hands and feet are out of the way of moving parts when starting engine.

ENGINE STARTING

PROCEDURES

NOTICE: There are two locations on this engine that require oil, both the crankcase and the transmission (gearbox). Running the engine or gearbox with a low oil level can cause engine damage. Refer to the engine manual for complete engine information and recommendations.

ENGINE OIL LEVEL CHECK

1.BEFORE CHECKING ENGINE:

•make certain the engine is level

•the engine switch is in the OFF position

•the sod cutter blade is NOT engaged

•the drive wheels are disengaged.

2.Remove the filler cap/dipstick and wipe it clean.

3.Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

4.If the oil level is low, fill to the edge of the oil filler hole with the recommended oil. SAE 10W-30 is recommended for general use. Refer to engine oil recommendations in engine manual for other viscosities and information.

5.Screw in the filler cap/dipstick securely.

TRANSMISSION OIL LEVEL CHECK

1.Check the transmission oil level with the engine stopped and in a level position.

2.Remove the filler cap/dipstick and wipe it clean.

3.Insert and remove the dipstick without screwing it into the filler hole. Check the oil level shown on the dipstick.

4.If the oil level is low, add oil to reach the upper limit mark on the dipstick. Use the same oil that is recommended for the engine, SAE 10W-30.

5.Screw in the filler cap/dipstick securely.

STARTING ENGINE

1.Turn fuel cock to the "open" position.

2.Turn choke on (closed).

3.Turn ignition switch to "on".

4.Move throttle lever on engine to half throttle position.

5.Pull recoil starter rope until engine starts.

6.After engine is warm, turn off choke (open).

7.Allow engine to run one minute before cutting sod.

8.Check engine rpm setting before operating. DO NOT exceed 3600 rpm.

STOPPING ENGINE

1.Turn throttle to "slow" position.

2.Turn off ignition switch.

SC-18, SC-12, SC-16, SC-20, SC-24 specifications

Classen offers a diverse range of professional-grade sod cutters, each designed to meet the unique needs of landscaping and turf management. The models SC-12, SC-16, SC-18, SC-20, and SC-24 showcase advanced features and technologies that provide users with efficient and reliable performance in turf removal and soil preparation.

The Classen SC-12 is designed for easy handling and efficient removal of sod in smaller spaces. It features a compact design, making it ideal for residential lawns and tight spots. The SC-12 is powered by a reliable engine that ensures consistent torque and speed, allowing users to effortlessly cut through even the toughest sod.

Moving up the range, the SC-16 offers increased cutting width and depth capabilities. With a powerful engine and adjustable cutting depth, it can slice through various types of grass and roots with ease. Its heavy-duty construction enhances durability, making it suitable for intensive use on larger properties or commercial jobs.

The SC-18 model further improves on the features of the SC-16 with enhanced stability and maneuverability. Equipped with ergonomic controls and a robust frame, the SC-18 minimizes operator fatigue during extended use. Additionally, its simple depth adjustment mechanism allows for quick setup, letting users tackle varying sod thicknesses with minimal downtime.

The SC-20 strikes a balance between power and versatility. This model boasts an advanced blade system that allows for precise cutting, while its larger cutting width enables users to cover more ground quickly. A user-friendly design ensures easy operation, making it a great choice for both professionals and DIY enthusiasts.

Finally, the SC-24 is the flagship model in the Classen sod cutter lineup. It features a high-powered engine that delivers maximum cutting performance in the toughest conditions. The SC-24 is equipped with all-terrain wheels, providing stability and traction on uneven surfaces. Its adjustable handle height caters to operators of various heights, enhancing comfort and control.

In summary, Classen sod cutters, including the SC-12, SC-16, SC-18, SC-20, and SC-24, present a complete solution for sod removal tasks. Each model is engineered with features that prioritize user comfort, cutting efficiency, and durability, making them essential tools for any landscaping professional. With these models, Classen continues to set the standard in turf management technology, ensuring operators can achieve the best results with confidence and ease.