Chauvet TRI-18 user manual Orientation, Rigging

Page 9

Mounting

Before mounting the product, read and follow the safety recommendations indicated in

 

the Safety Notes.

Orientation

The SlimBANK™ TRI-18 may be mounted in any position; however, make sure

 

adequate ventilation is provided around the product.

Rigging

Before deciding on a location, always make sure there is easy access to the product

 

for maintenance and programming.

 

Make sure that the structure or surface onto which you are mounting the product

 

can support the product’s weight (see the Technical Specifications).

 

When mounting the product overhead, always use a safety cable. Mount the

 

product securely to a rigging point, such as an elevated platform or a truss.

 

When rigging the product onto a truss, you should use a mounting clamp of

 

appropriate weight capacity. The bracket has a 13-mm holes, which are appropriate

 

for this purpose.

 

When power linking multiple products, you must always consider the length of the

 

power linking cable and mount the products close enough for the cable to reach.

 

The bracket adjustment knobs allow for directional adjustment when aiming the

 

product to the desired angle. Only loosen or tighten the bracket knobs manually.

 

Using tools could damage the knobs.

 

The double-bracketed yoke also serves as floor supports. When mounting the

 

product on the floor, make sure that the product and cables are away from people

 

and vehicles.

Mounting Diagram

Double-Bracketed

Mounting Clamps

 

 

Yoke

 

Safety Cable

Bracket

Adjustment

Knobs

Overhead Mount

Floor Mount

SlimBANK™ TRI-18 User Manual

Page 9 of 19

Image 9
Contents Page Table of Contents Before YOU Begin Product at a Glance Safety NotesOverview IntroductionDimensions Fuse Replacement AC PowerDisconnect the product from power before replacing the fuse Electrocution or fireDiagram Power LinkingRigging OrientationOperation Control Panel OperationMenu Map Configuration SlimBANK TRI-18 Sections for DMX ControlPersonalities Starting Address Channel Function Value Setting DMX Channel Modes, Assignments, and ValuesChannel Custom Color Configuration Standalone Static Colors Selecting the Dimmer Mode Temperature DisplayMaster/Slave Mode Slave unitsMaster unit Technical Information Product MaintenanceTechnical Specifications General Information Returns Contact Us