Chauvet TRI-18 user manual Technical Information, Product Maintenance

Page 17

5.TECHNICAL INFORMATION

Product

Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and mechanical wear. To maintain optimum performance and minimize wear, clean the product at least twice a month. However, usage and environmental conditions contribute to increased cleaning frequency.

To clean the product, follow the instructions below:

Unplug the product from power.

Wait until the product is at room temperature.

Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface and vents.

Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.

Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

Softly wipe any dirt or grime to the outside edges of the external optics or glass/transparent surface.

Gently polish the external optics and glass/transparent surfaces until they are free of haze and lint.

Always dry the external optics and glass/transparent surfaces carefully after cleaning them.

SlimBANK™ TRI-18 User Manual

Page 17 of 19

Image 17
Contents Page Table of Contents Before YOU Begin Product at a Glance Safety NotesOverview IntroductionDimensions Fuse Replacement AC PowerDisconnect the product from power before replacing the fuse Electrocution or fireDiagram Power LinkingRigging OrientationMenu Map OperationControl Panel Operation Personalities Starting Address ConfigurationSlimBANK TRI-18 Sections for DMX Control Channel Channel Function Value SettingDMX Channel Modes, Assignments, and Values Custom Color Configuration Standalone Static Colors Selecting the Dimmer Mode Temperature DisplayMaster unit Master/Slave ModeSlave units Technical Information Product MaintenanceTechnical Specifications General Information Returns Contact Us