Chauvet user manual Configuration, SlimBANK TRI-18 Sections for DMX Control

Page 11

Configuration

(DMX)

DMX

Personalities and

Starting Address

Set the product in DMX mode to control with a DMX controller.

1.Connect the product to a suitable power outlet.

2.Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.

The SlimBANK™ TRI-18 uses up to 13 DMX channels in its 13-channel DMX personality, which defines the highest configurable address to 500.

If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com. To select the DMX personality and starting address, do the following:

1.Press <MENU> repeatedly until 3-CH(3-channel mode), 5-CH(5-channel mode), 9-CH(9-channel mode), or 13CH (13-channel mode) shows on the display.

2.Press <ENTER> and d 1d512shows on the display.

3.Use <UP> or <DOWN> to select the starting address.

4.Press <ENTER>.

SlimBANK™ TRI-18 Sections for DMX Control

Section 1

Section 2

Section 3

SlimBANK™ TRI-18 User Manual

Page 11 of 19

Image 11
Contents Page Table of Contents Before YOU Begin Product at a Glance Safety NotesOverview IntroductionDimensions Electrocution or fire AC PowerFuse Replacement Disconnect the product from power before replacing the fuseDiagram Power LinkingRigging OrientationMenu Map OperationControl Panel Operation Personalities Starting Address ConfigurationSlimBANK TRI-18 Sections for DMX Control Channel Channel Function Value SettingDMX Channel Modes, Assignments, and Values Custom Color Configuration Standalone Static Colors Selecting the Dimmer Mode Temperature DisplayMaster unit Master/Slave ModeSlave units Technical Information Product MaintenanceTechnical Specifications General Information Returns Contact Us