Static Colors

Custom Color Mixing

Selecting the Dimmer Mode

To select a preset static color, do the following:

1.Press <MENU> repeatedly until C--shows on the display.

2.Press <ENTER> and r (red), g (green), b (blue), gb (cyan), r b (magenta), rg (yellow), or rgb (white) shows on the display.

3.Use <UP> or <DOWN> to select the desired preset color.

4.Press <ENTER>.

To custom mix a color, follow the instructions below:

1.Press <MENU> repeatedly until U--shows on the display.

2.Press <ENTER> and one of the following colors shows on the display: rXXX (red), gXXX (green), or bXXX (blue).

3.Press <ENTER> repeatedly to select the desired color.

4.Use <UP> or <DOWN> to select the desired color value 0–255(0 to 100%). NOTE: Selecting 0 will turn the color off.

5.Press <ENTER> to set the color value and continue to the next color.

6.Repeat steps 3 to 5 until you create your desired color.

To select the dimmer mode, do the following:

1.Press <MENU> repeatedly until dIM shows on the display.

2.Press <ENTER> and one of the following shows on the display:

∙OFF (dimmer speed off)

∙dIM1 (dimmer mode 1, fast speed)

∙dIM2 (dimmer mode 2, middle speed)

∙dIM3 (dimmer mode 3, slow speed)

3.Use <UP> or <DOWN> to select the desired dimmer mode.

4.Press <ENTER>.

To view the temperature of the LEDs, follow the instructions below:

1.Press <MENU> repeatedly until tEMP shows on the display.

2.Press <ENTER> and the temperature will be shown in degrees Celsius.

SlimBANK™ TRI-18 User Manual

Page 15 of 19