Chauvet 64-36VWC Operating Instructions, Configuring the Starting Address Control Panel Functions

4.OPERATING INSTRUCTIONS

Configuring the Starting Address

Each fixture requires a starting address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the starting address. For example, a fixture that uses seven DMX channels and is addressed to start on DMX channel 100, will read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose the starting addresses for each fixture so that the channels used do not overlap. In addition, you should note the starting address selected for future reference. The LED Par 64-36VW B/C fixture uses two or four DMX channels. If you are unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.

Control Panel Functions

Access control panel functions using the four buttons located directly underneath the LED display on the control panel.

BUTTON	FUNCTION
	Used to scroll through the
<MENU>	current operating mode,
	as well as back out of the
	current menu option
<UP>	Used to select increasing
	advancement in the value
<DOWN>	Used to select decreasing
	advancement in the value
<ENTER>	Used to select a value and
	store it to memory

MENU UP DOWN ENTER

The Control Panel shows the current state of the unit. It is used to select the operating mode, as well as the sub-features. For a detailed layout of the control panel functions, please see the “menu map” section on the following page.

Menu Map

MAIN
FUNCTION	SUB-FUNCTION	SELECTION	SUB-SELECTION	INSTRUCTION
	P1	3 Color Switching		Select between 1 switching and 1
	P2	3 Color fading	-	fading auto programs (Use S--to
P--				modify the speed)
			Use the Audio
	P3
		3 Color Switching	Adjustment Knob located	Sound-Active program
			on the back of the fixture
2-CH	d001~d512	-	-	Select 2-channel DMX mode: warm
				white, cool white
4-CH	d001~d512			Select 4-channel DMX mode:
		-	-	master dimmer, warm white, cool
	C1			white, strobe
		Warm White		Select between 3 static colors. The
C--	C2	Cool White	-	display will read C1~C3. The
				colors that each of these represent
	C3	Warm and Cool White
				are indicated to the left.
S--	S001~S100	(default range is S050)	-	This is the speed range for the 2
				switching and fading built-in
	r---			programs
U--		Warm White	000~100	Combine warm white and cool white
	C---	Cool White		to create a custom, static color

LED Par 64-36VW B&C User Manual 9 Rev. 4