Chauvet 3030504 user manual Technical Information, Product Maintenance

5.TECHNICAL INFORMATION

Product

Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and mechanical wear. To maintain optimum performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increasing the cleaning frequency.

To clean the product, follow the instructions below:

•Unplug the product from power.

•Wait until the product is cold.

•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.

•Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.

•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

•Softly wipe any dirt or grime to the outside edge of the transparent surface.

•Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.

Page 14 of 17 4BAR™ Flex User Manual (Rev. 3)