Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation The 4BAR™ Flex may be mounted in any position; however, make sure adequate ventilation is provided around the product.
Rigging • Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
•Make sure that the structure onto which you are mounting the product can support the product’s weight. Please see the Technical Specifications for weight information.
•When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
•When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity.
•When power linking multiple products, you must always consider the length of the power linking cable and mount the products close enough for the cable to reach.
•The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Pod pan adjustment
Mounting Diagram
Tripod insertion
Pod tilt adjustment
4BAR™ Flex User Manual (Rev. 3) | Page 9 of 17 |