Operation
4. Operation
Control Panel
Description
Button | Function | |
<MENU> | Exits from the current menu or function | |
<ENTER> | Enables the currently displayed menu or sets the currently selected | |
value in to the current function | ||
| ||
<UP> | Navigates upward through the menu list and increases the numeric | |
value when in a function | ||
| ||
<DOWN> | Navigates downward through the menu list and decreases the numeric | |
value when in a function | ||
|
Control Options | You can set the |
| control of up to 30 units in the |
Programming | Refer to the Menu Map to learn about the menu options. The Menu Map has a Menu Level |
| and a variety of programming levels for each option. |
| ∙ To go to an option in the Menu Level, press <MENU> repeatedly until the option shows |
| on the display. Press <ENTER> to select. This will take you to the first programming |
| level for that option. |
| ∙ To select an option or value within the current programming level, press <UP> or |
| <DOWN> until the option shows on the display. Press <ENTER> to select. In this |
| case, if there is another programming level, you will see that first option or you will see |
| the selected value. |
| ∙ To exit to the previous menu level, press <MENU>. |
| In the EDIT menu, <UP> and <DOWN> will only change the value of the current |
| option. To change to the next option, press <ENTER>. |
| 1. Select DMX operation. |
| a) Go to MENU > INTRO > RUN. |
| b) Select DMX 512. |
DMX Operation | 2. Select a DMX mode. |
a) Go to MENU > INTRO > PERSON. | |
| b) Select BASIC or ADVANCED. |
| 3. Select the starting address. |
| a) Go to MENU > INTRO > ADDRESS. |
| b) Select a starting address, 001~496 (Advanced) or 001~500 (Basic). |
The highest possible starting address for each DMX mode is as follows:
DMX Mode | DMX Address |
Basic | 500 |
Advanced | 496 |