Operation
Keylock
Reset
Dimmer Curve
Locks or unlocks the product’s display.
1.Go to MENU > INTRO > KEYLOCK.
2.Select YES or NO.
When Keylock is in the “YES” setting, you will have to enter the password after 30 seconds of control panel inactivity or each time you turn the product on.
The default
Reset all custom settings to their default values.
1.Go to MENU > INTRO > RESET.
2.Select YES or NO.
This option defines the output speed when you modify the values of the dimmer faders. This setting provides you with four different options to simulate the dimming curve of an incandescent lighting product.
1.Go to MENU > INTRO > DIMMER.
2.Select DIMMER 0~4.
DIMMER 0: The output is proportional (linear) to the dimmer channel.
DIMMER 1~4: The output follows the dimmer channel values based on the corresponding dimmer curve, being DIM1 the fastest and DIM4 the slowest.