Operation
Fader Reversal
Range Limitation
Reset Control
Loss of DMX
Settings
Define how the pan, tilt, and dimmer increase.
1.Go to MENU > INVERT > PAN.
2.Select a fader direction (NORMAL or REVERSE).
3.Go to MENU > INVERT > TILT.
4.Select a fader direction (NORMAL or REVERSE).
5.Go to MENU > INVERT > DIMMER.
6.Select a fader direction (NORMAL or REVERSE).
7.Go to MENU > INVERT > USE.
8.Select YES to activate the new settings or NO to stop using them.
∙When in NORMAL, the pan, tilt, and dimmer values will increase as the position of the respective fader increases.
∙When in REVERSE, the pan, tilt, and dimmer values will decrease as the position of the respective fader increases.
Limit the pan or tilt range.
1.Go to MENU > RANGE > P/START.
2.Select the starting point for the limited pan (000~255).
3.Go to MENU > RANGE > P/FINISH.
4.Select the finishing point for the limited pan (000~255).
5.Go to MENU > RANGE > T/START.
6.Select the starting point for the limited tilt (000~255).
7.Go to MENU > RANGE > T/FINISH.
8.Select the finishing point for the limited tilt (000~255).
9.Go to MENU > RANGE > USE.
10.Select YES to activate the new settings or NO to stop using them.
Select how you reset the product, either using the DMX controller or from the control panel.
1.Go to MENU > SPECIAL > RESET.
2.Select DMX or SYSTEM.
DMX: Enables the DMX controller to reset the product (Control function). SYSTEM: Restricts the reset function to the control panel.
Activate or deactivate the
1.Go to MENU > SPECIAL > BLACKD.
2.Select YES to enable the 3 seconds delay or NO to make the blackout immediate.
Define response to a DMX failure.
1.Go to MENU > SPECIAL > DMXERROR.
2.Select SAVE to show the last look when DMX is lost or BLAK to make the product blackout immediately.