Modena® II
installation Halogen bulb and glass
Step 13. Screw the 100 Watt Halogen bulb into the socket. If it is touched, or dirty, clean carefully with a tissue. A dirty glass bulb will cause the bulb to fail almost immediately.
CAUTION! Do not touch the bulb with your
be clean.
Step 14. Position the indentations in the outer rim of
the glass shade so that they line up with the tabs on the
inside surface of the fan light fixture rim.
Step 15. Carefully lift the glass shade up inside the
lightfixture as far as it will go.
Step 16. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs.
CAUTION! Improper installation of glass may cause it to be damaged or it to fall and break.
NOTE: In compliance with US Federal Energy Regulations, this ceiling fan contains a device that restricts the light fixture to a maximum of 190 watts. Exceeding that limit or the marked limit on this product may result in a fire hazard or improper operation.
7