Casablanca Fan Company PSG73M owner manual Blade Installation, No Light CAP Option

FAN PREPARATION (CONT.)

Installation/Replacement of Incandescent Lightbulbs

Step 5. Remove the two screws from the cover door as shown and lift door from motor. Install a 40-watt S-11 type incandescent lightbulb in the socket. Replace the door and re-insert the screws. Repeat twice more.

NOTE: When replacing lightbulbs, be sure to use only 40-watt maximum.

BLADE INSTALLATION

BLADE HARDWARE (not to scale)

SIENA™

	Allen Screw Pack C:
Blades (5)	Blade Screws and Washers (16)

Step 6a. Align the holes in the Siena® exclusive blade with the holes in the bladeholder.

Step 6b. Using Screw Pack C and the Allen wrench provided, install the Allen screws in the blade and bladeholder as shown. Repeat for each additional blade.

CAUTION:

Blade screws must be tightened securely before operating the fan.

Allen

Wrench

NO LIGHT CAP OPTION

Note: If you are installing the accessory light fixture, skip to Step 8a now.

Step 7a. Carefully tuck the light wires into the no light cap, as shown.

Step 7b. Thread the no light cap into the adapter plate, as shown.

7