Light KIT Installation

SIENA™

LIGHT KIT HARDWARE (not to scale)

	Glass Shade	Downlight Lightbulbs (3)
Light Kit	Glass Shade	60-watt A-15

Light Assembly Installation

Step 11a. Connect the light assembly connector to the motor connector, as shown.

Step 11b. Carefully tuck the wires and align the light assembly with the adapter plate.

Step 11c. Screw the finial rod into the adapter plate to secure.

Install Glass Shades

Step 12a. Remove the three lock rings from the light fixture and set aside.

Step 12b. Slide the glass shade into the fixture and hold firmly. Using the glass locking rings removed in Step 14a, secure each piece of glass firmly to the light fixture.

Assure each piece of glass is firmly installed by rotating
the glass clockwise until it is no longer loose.	Finial

Install Incandescent Lightbulbs

Step 13a. Screw the three 60 Watt type A15 bulbs into each socket.

NOTE: When replacing lightbulbs, be sure to use only 60-watt maximum.

Finial Rod

Lock Ring