CAT 627G manual Battery and Battery Cables

Page 19

22

SEBU7858-03

Safety Section

 

Fire Prevention and Explosion Prevention

 

Always perform a Walk-Around Inspection, which may help you identify a fire hazard. Do not operate a machine when a fire hazard exists. Contact your Caterpillar dealer for service.

Understand the use of the primary exit and alternative exit on the machine. Refer to Operation and Maintenance Manual, “Alternative Exit”.

Do not operate a machine with a fluid leak. Repair leaks and clean up fluids before resuming machine operation. Fluids that are leaking or spilled onto hot surfaces or onto electrical components can cause a fire. A fire may cause personal injury or death.

Remove flammable material such as leaves, twigs, papers, trash, etc. These items may accumulate in the engine compartment or around other hot areas and hot parts on the machine.

Keep the access doors to major machine compartments closed and access doors in working condition in order to permit the use of fire suppression equipment, in case a fire should occur.

Clean all accumulations of flammable materials such as fuel, oil and debris from the machine.

Do not operate the machine near any flame.

Keep shields in place. Exhaust shields (if equipped) protect hot exhaust components from oil spray or fuel spray in case of a break in a line, in a hose, or in a seal. Exhaust shields must be installed correctly.

Do not weld or flame cut on tanks or lines that contain flammable fluids or flammable material. Empty and purge the lines and tanks. Then clean the lines and tanks with a nonflammable solvent prior to welding or flame cutting. Ensure that the components are properly grounded in order to avoid unwanted arcs.

Dust that is generated from repairing nonmetallic hoods or fenders may be flammable and/or explosive. Repair such components in a well ventilated area away from open flames or sparks. Use suitable Personal Protection Equipment (PPE).

Inspect all lines and hoses for wear or deterioration. Replace damaged lines and hoses. The lines and the hoses should have adequate support and secure clamps. Tighten all connections to the recommended torque. Damage to the protective cover or insulation may provide fuel for fires.

Store fuels and lubricants in properly marked containers away from unauthorized personnel. Store oily rags and flammable materials in protective containers. Do not smoke in areas that are used for storing flammable materials.

Illustration 24

g00704059

 

Use caution when you are fueling a machine. Do not smoke while you are fueling a machine. Do not fuel a machine near open flames or sparks. Always stop the engine before fueling. Fill the fuel tank outdoors. Properly clean areas of spillage.

Follow practices for safe fueling that are described in the “Operation” section of the Operation and Maintenance Manual section and follow local regulations. Never store flammable fluids in the operator compartment of the machine.

Battery and Battery Cables

Illustration 25

g00704135

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DBD1-Up Machine DBZ1-Up Scraper Operation Maintenance ManualImportant Safety Information Smcs Code 7000 Safety MessagesSEBU7858-03 Safety Section Safety Messages G01954945 No Clearance Do Not OperateDo Not Weld On The ROPS/FOPS Structure Improper Connections For Jump Start Cables Seat BeltHigh Compressed Spring Engage The Apron Locking Pin Engine CoolantG01371640 Crushing Hazard Product Link 13 If EquippedAdditional Messages Air Conditioner Alternate ExitHood Brace Air TankAuger Bearing Data PrivacyEngine Coolant General Hazard InformationSmcs Code Containing Fluid Spillage Pressurized Air and WaterTrapped Pressure Fluid PenetrationAsbestos Information Crushing Prevention and Cutting PreventionDispose of Waste Properly Coolant Fire Prevention and Explosion Prevention Burn PreventionOils BatteriesBattery and Battery Cables Lines, Tubes and Hoses WiringEther Fire Extinguisher LocationFire Extinguisher Smcs Code 1000 Tire InformationElectrical Storm Injury Prevention Before Starting EngineBefore Operation Engine StartingVisibility Information Restricted Visibility Machine Operation Machine Operating Temperature RangeOperation Engine StoppingSlope Operation ParkingInformation Concerning Hand/Arm Vibration Level Equipment Lowering with Engine StoppedSound Information and Vibration Information Sound Level InformationWheel Scraper Work cycle Sources Guards Operator Protection Operator StationOther Guards If Equipped SEBU7858-03

627G specifications

The CAT 627G is a versatile and powerful motor grader designed for high-performance earthmoving and construction tasks. This machine combines advanced technology with robust engineering to provide operators with a reliable solution for grading, leveling, and shaping tasks in various terrains.

One of the standout features of the CAT 627G is its powerful C9.3 engine, which delivers high horsepower and torque, ensuring optimal performance even in the toughest conditions. This engine is coupled with a responsive transmission system, providing smooth operation and precise control over speed and power. The motor grader is designed for fuel efficiency, reducing operational costs while maximizing productivity.

The CAT 627G boasts a patented blade system that allows for exceptional cutting depth and precision. The blade can be easily adjusted for angle and height, enabling operators to adapt to different grading requirements quickly. With an impressive maximum blade lift height, this machine can handle large volumes of material effortlessly, making it ideal for applications such as road construction, site preparation, and ditching.

Another key characteristic of the CAT 627G is its operator-focused design. The cab is spacious and ergonomically designed, providing excellent visibility of the work area. The intuitive controls and advanced display systems allow for easy navigation of the machine’s functions, improving operator efficiency and reducing fatigue during long working hours. Additionally, the cab is equipped with climate control features, ensuring comfort regardless of external weather conditions.

The integration of advanced technologies sets the CAT 627G apart from other graders in its class. It comes with a comprehensive suite of grade control systems that enhance precision and accuracy in grading tasks. These systems can include GPS, laser guiding, and advanced feedback mechanisms, allowing operators to achieve optimal results with reduced manual effort.

Durability is a hallmark of the CAT 627G, with a robust frame and high-quality components designed to withstand rugged operating conditions. The maintenance-friendly design ensures that service and repairs can be performed quickly, minimizing downtime and keeping projects on schedule.

In summary, the CAT 627G is a powerful, efficient, and technologically advanced motor grader that meets the demands of modern construction and earthmoving projects. With its combination of a high-performance engine, innovative blade system, operator-centric design, and advanced technologies, it is a reliable choice for contractors seeking to enhance their operational efficiency and productivity.
Top Page Image Contents