CAT 627G manual Fire Prevention and Explosion Prevention Burn Prevention, Oils, Batteries, Coolant

Page 18

SEBU7858-03

21

 

Safety Section

 

Burn Prevention

Never jump across the starter solenoid terminals in order to start the engine. Unexpected machine movement could result.

Whenever there are equipment control linkages the clearance in the linkage area will change with the movement of the equipment or the machine. Stay clear of areas that may have a sudden change in clearance with machine movement or equipment movement.

Stay clear of all rotating and moving parts.

If it is necessary to remove guards in order to perform maintenance, always install the guards after the maintenance is performed.

Keep objects away from moving fan blades. The fan blade will throw objects or cut objects.

Do not use a kinked wire cable or a frayed wire cable. Wear gloves when you handle wire cable.

When you strike a retainer pin with force, the retainer pin can fly out. The loose retainer pin can injure personnel. Make sure that the area is clear of people when you strike a retainer pin. To avoid injury to your eyes, wear protective glasses when you strike a retainer pin.

Chips or other debris can fly off an object when you strike the object. Make sure that no one can be injured by flying debris before striking any object.

i01329099

Ensure that the filler cap is cool before removing the filler cap. The filler cap must be cool enough to touch with a bare hand. Remove the filler cap slowly in order to relieve pressure.

Cooling system conditioner contains alkali. Alkali can cause personal injury. Do not allow alkali to contact the skin, the eyes, or the mouth.

Oils

Hot oil and hot components can cause personal injury. Do not allow hot oil to contact the skin. Also, do not allow hot components to contact the skin.

Remove the hydraulic tank filler cap only after the engine has been stopped. The filler cap must be cool enough to touch with a bare hand. Follow the standard procedure in this manual in order to remove the hydraulic tank filler cap.

Batteries

Electrolyte is an acid. Electrolyte can cause personal injury. Do not allow electrolyte to contact the skin or the eyes. Always wear protective glasses for servicing batteries. Wash hands after touching the batteries and connectors. Use of gloves is recommended.

i03605020

Fire Prevention and Explosion Prevention

Burn Prevention

SMCS Code: 7000

Do not touch any part of an operating engine. Allow the engine to cool before any maintenance is performed on the engine. Relieve all pressure in the air system, in the oil system, in the lubrication system, in the fuel system, or in the cooling system before any lines, fittings or related items are disconnected.

Coolant

When the engine is at operating temperature, the engine coolant is hot. The coolant is also under pressure. The radiator and all lines to the heaters or to the engine contain hot coolant.

Any contact with hot coolant or with steam can cause severe burns. Allow cooling system components to cool before the cooling system is drained.

Check the coolant level only after the engine has been stopped.

SMCS Code: 7000

Illustration 23

g00704000

 

General

All fuels, most lubricants, and some coolant mixtures are flammable.

To minimize the risk of fire or explosion, Caterpillar recommends the following actions.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operation Maintenance Manual DBD1-Up Machine DBZ1-Up ScraperImportant Safety Information Safety Messages Smcs Code 7000SEBU7858-03 Safety Section Safety Messages G01954945 Do Not Operate No ClearanceDo Not Weld On The ROPS/FOPS Structure Seat Belt Improper Connections For Jump Start CablesHigh Compressed Spring Engine Coolant Engage The Apron Locking PinG01371640 Product Link 13 If Equipped Crushing HazardAdditional Messages Alternate Exit Air ConditionerData Privacy Air TankAuger Bearing Hood BraceGeneral Hazard Information Engine CoolantSmcs Code Fluid Penetration Pressurized Air and WaterTrapped Pressure Containing Fluid SpillageCrushing Prevention and Cutting Prevention Asbestos InformationDispose of Waste Properly Batteries Fire Prevention and Explosion Prevention Burn PreventionOils CoolantBattery and Battery Cables Wiring Lines, Tubes and HosesFire Extinguisher Location EtherFire Extinguisher Before Starting Engine Tire InformationElectrical Storm Injury Prevention Smcs Code 1000Engine Starting Before OperationVisibility Information Restricted Visibility Engine Stopping Machine Operating Temperature RangeOperation Machine OperationParking Slope OperationSound Level Information Equipment Lowering with Engine StoppedSound Information and Vibration Information Information Concerning Hand/Arm Vibration LevelWheel Scraper Work cycle Sources Operator Station Guards Operator ProtectionOther Guards If Equipped SEBU7858-03

627G specifications

The CAT 627G is a versatile and powerful motor grader designed for high-performance earthmoving and construction tasks. This machine combines advanced technology with robust engineering to provide operators with a reliable solution for grading, leveling, and shaping tasks in various terrains.

One of the standout features of the CAT 627G is its powerful C9.3 engine, which delivers high horsepower and torque, ensuring optimal performance even in the toughest conditions. This engine is coupled with a responsive transmission system, providing smooth operation and precise control over speed and power. The motor grader is designed for fuel efficiency, reducing operational costs while maximizing productivity.

The CAT 627G boasts a patented blade system that allows for exceptional cutting depth and precision. The blade can be easily adjusted for angle and height, enabling operators to adapt to different grading requirements quickly. With an impressive maximum blade lift height, this machine can handle large volumes of material effortlessly, making it ideal for applications such as road construction, site preparation, and ditching.

Another key characteristic of the CAT 627G is its operator-focused design. The cab is spacious and ergonomically designed, providing excellent visibility of the work area. The intuitive controls and advanced display systems allow for easy navigation of the machine’s functions, improving operator efficiency and reducing fatigue during long working hours. Additionally, the cab is equipped with climate control features, ensuring comfort regardless of external weather conditions.

The integration of advanced technologies sets the CAT 627G apart from other graders in its class. It comes with a comprehensive suite of grade control systems that enhance precision and accuracy in grading tasks. These systems can include GPS, laser guiding, and advanced feedback mechanisms, allowing operators to achieve optimal results with reduced manual effort.

Durability is a hallmark of the CAT 627G, with a robust frame and high-quality components designed to withstand rugged operating conditions. The maintenance-friendly design ensures that service and repairs can be performed quickly, minimizing downtime and keeping projects on schedule.

In summary, the CAT 627G is a powerful, efficient, and technologically advanced motor grader that meets the demands of modern construction and earthmoving projects. With its combination of a high-performance engine, innovative blade system, operator-centric design, and advanced technologies, it is a reliable choice for contractors seeking to enhance their operational efficiency and productivity.
Top Page Image Contents