CAT 627G manual Engine Starting, Before Operation

Page 23

26

 

SEBU7858-03

Safety Section

 

 

Engine Starting

 

 

 

 

 

 

 

i03565626

 

 

Engine Starting

 

 

SMCS Code: 1000; 7000

 

 

If a warning tag is attached to the engine start switch

 

 

or to the machine controls, do not start the engine.

 

 

Also, do not move any machine controls.

 

 

Move all hydraulic controls to the HOLD position or to

 

 

the OFF position before you start the engine.

 

 

Move the transmission control (lever) to the

 

 

NEUTRAL position.

 

 

Illustration 28

g00927804

 

 

Depress the machine horn (1) in order to make sure that the machine horn works properly.

Illustration 29

g01120628

 

Typical example

 

Engage the parking brake control.

Diesel engine exhaust contains products of combustion which can be harmful to your health. Always start the engine in a well ventilated area. Always operate the engine in a well ventilated area. If you are in an enclosed area, vent the exhaust to the outside.

Briefly sound the horn before you start the engine.

i01349075

Before Operation

SMCS Code: 7000

Clear all personnel from the machine and from the area.

Adjust the mirrors (2) on your machine for the best operator vision. Adjust both the inside mirror and the outside mirror before you operate the machine.

Inspect the condition of the seat belt and the condition of mounting hardware. Replace any damaged parts and any worn parts. Regardless of appearance, replace the seat belt after three years of use. Do not use a seat belt extension on a retractable seat belt.

Adjust the seat in order to achieve full pedal travel when the operator's back is against the back of the seat.

Make sure that the machine is equipped with a lighting system that is adequate for the job conditions. Make sure that all lights are working properly.

Before you start the engine or before you move the machine, make sure that no one is on the machine, underneath the machine, or around the machine.

Make sure that there are no personnel in the area.

Clear all obstacles from the path of the machine. Beware of hazards such as wires, ditches, etc.

Make sure that all windows are clean. Secure the doors in the open position or in the shut position. Secure the windows in the open position or in the shut position.

For the best vision of the area that is close to the machine, adjust the rear view mirrors (if equipped).

Make sure that the machine horn, the backup alarm (if equipped) and all other warning devices are working properly.

Fasten the seat belt securely.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DBD1-Up Machine DBZ1-Up Scraper Operation Maintenance ManualImportant Safety Information Smcs Code 7000 Safety MessagesSEBU7858-03 Safety Section Safety Messages G01954945 No Clearance Do Not OperateDo Not Weld On The ROPS/FOPS Structure High Compressed Spring Seat BeltImproper Connections For Jump Start Cables Engage The Apron Locking Pin Engine CoolantG01371640 Crushing Hazard Product Link 13 If EquippedAdditional Messages Air Conditioner Alternate ExitHood Brace Air TankAuger Bearing Data PrivacySmcs Code General Hazard InformationEngine Coolant Containing Fluid Spillage Pressurized Air and WaterTrapped Pressure Fluid PenetrationDispose of Waste Properly Crushing Prevention and Cutting PreventionAsbestos Information Coolant Fire Prevention and Explosion Prevention Burn PreventionOils BatteriesBattery and Battery Cables Lines, Tubes and Hoses WiringFire Extinguisher Fire Extinguisher LocationEther Smcs Code 1000 Tire InformationElectrical Storm Injury Prevention Before Starting EngineBefore Operation Engine StartingVisibility Information Restricted Visibility Machine Operation Machine Operating Temperature RangeOperation Engine StoppingSlope Operation ParkingInformation Concerning Hand/Arm Vibration Level Equipment Lowering with Engine StoppedSound Information and Vibration Information Sound Level InformationWheel Scraper Work cycle Sources Other Guards If Equipped Operator StationGuards Operator Protection SEBU7858-03

627G specifications

The CAT 627G is a versatile and powerful motor grader designed for high-performance earthmoving and construction tasks. This machine combines advanced technology with robust engineering to provide operators with a reliable solution for grading, leveling, and shaping tasks in various terrains.

One of the standout features of the CAT 627G is its powerful C9.3 engine, which delivers high horsepower and torque, ensuring optimal performance even in the toughest conditions. This engine is coupled with a responsive transmission system, providing smooth operation and precise control over speed and power. The motor grader is designed for fuel efficiency, reducing operational costs while maximizing productivity.

The CAT 627G boasts a patented blade system that allows for exceptional cutting depth and precision. The blade can be easily adjusted for angle and height, enabling operators to adapt to different grading requirements quickly. With an impressive maximum blade lift height, this machine can handle large volumes of material effortlessly, making it ideal for applications such as road construction, site preparation, and ditching.

Another key characteristic of the CAT 627G is its operator-focused design. The cab is spacious and ergonomically designed, providing excellent visibility of the work area. The intuitive controls and advanced display systems allow for easy navigation of the machine’s functions, improving operator efficiency and reducing fatigue during long working hours. Additionally, the cab is equipped with climate control features, ensuring comfort regardless of external weather conditions.

The integration of advanced technologies sets the CAT 627G apart from other graders in its class. It comes with a comprehensive suite of grade control systems that enhance precision and accuracy in grading tasks. These systems can include GPS, laser guiding, and advanced feedback mechanisms, allowing operators to achieve optimal results with reduced manual effort.

Durability is a hallmark of the CAT 627G, with a robust frame and high-quality components designed to withstand rugged operating conditions. The maintenance-friendly design ensures that service and repairs can be performed quickly, minimizing downtime and keeping projects on schedule.

In summary, the CAT 627G is a powerful, efficient, and technologically advanced motor grader that meets the demands of modern construction and earthmoving projects. With its combination of a high-performance engine, innovative blade system, operator-centric design, and advanced technologies, it is a reliable choice for contractors seeking to enhance their operational efficiency and productivity.
Top Page Image Contents