Bush Hog 1035 manual Operation

Page 60
(SL-25)
(SL-18)
(SL-17)
(SL-16)
(SL-12)
(SL-09)
(SL-08)

OPERATION

OPERATION

Do not raise the loader into an overhead structure or allow a raised attachment to contact overhead structures. Sudden or unexpected contact with an overhead structure could result in serious injury.

Do not let the loader or attachment contact electrical power lines. Contact with electrical power lines can result in serious injury or electrocution. If the loader attachment contacts a power line remain in the tractor seat until the power has been shut off. Stepping off the tractor can permit electrical current to pass through the body resulting in electrocution.

Carry the loader and attachment low when transporting to reduce the potential of the tractor tipping over. Transport on slopes only at slow speeds and use gradual turning angles. Tractor wheel contact with any wash out, drop off or ground obstruction with a raised loader could result in the tractor tipping over and causing serious injury.

Do not work from the loader or attachments. Do now allow any riders on the loader, tractor or attachments. Falling off the loader could result in serious injury and/or tractor run over. (SL-14)

Do not operate the loader from the ground. Operate the tractor and loader only while seated in the tractor seat with the seatbelt fastened. The loader could fall crushing a person resulting in serious injury or death.

Use extreme care when piling material above 6 feet high. Material could shift and fall onto the operator or bystanders. The material could crush or suffocate the operator or bystander resulting in serious injury or death.

Know before you DIG. Call 888-258-0808 and request that all buried utilities locations be identified before digging in unfamiliar ground. Do not let the loader or attachment contact buried electrical power lines, utilities or gas lines. Contact with electrical power lines can result in serious bodily injury or electrocution. If the loader contacts a power line, remain in the tractor seat until the power has been shut off. Stepping off the tractor can permit electrical current to pass through the body resulting in electrocution.

Do not use loader as a jack to raise the tractor tires off the ground. The loader could fail causing the tractor and loader to fall to the ground resulting in serious injury.

1035 01/11

Operation Section 4-20

© 2011 Alamo Group Inc.

Page 59 Page 61
Image 60
Page 59 Page 61
Contents 1035 Warranty Information To the Owner/Operator/DealerTable of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1035 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 1035 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices 1035 01/11 Safety Section Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesParts Information Decal Location Logo ModelInstruct ReflctrDecal Description Model NameD469 1035 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsProper Ballasting and Wheel Spacing Dismounting and Mounting Mid-Mount Loader Dismounting Loader Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications GPMOperator Requirements Operation Tractor Requirements Personal Protective Equipment PPERops and Seat Belt Tractor Lighting and SMV EmblemTractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection/ServiceMount Assembly Loader Boom Assembly Hydraulic Line InspectionBucket Inspection Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation SL-33 Operation Operating the Loader Filling the BucketLifting the Load Carrying the Load Dumping the Bucket Lowering the BucketOperating with Float Control Loading from a BankOperation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Page Maintenance Section Maintenance 1035 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Adjusting Bucket Level IndicatorCylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly StorageMaintenance Proper Torque for Fasteners Maintenance Maintenance Limited Warranty Required of the Owner Required of the OperatorSOM-01/11 Printed U.S.A

1035 specifications

The Bush Hog 1035 is a versatile and robust rotary mower designed for agricultural and landscaping applications. Renowned for its durability and efficiency, this model is widely used by farmers and landowners who require a reliable tool for managing heavy brush, grass, and other vegetation.

One of the standout features of the Bush Hog 1035 is its heavy-duty construction. Built with a reinforced frame and high-quality materials, this mower can withstand rigorous use in various terrains. The 1035 boasts a mowing width of 35 inches, making it ideal for tackling medium to large areas while efficiently cutting through dense underbrush and grass.

Powering the Bush Hog 1035 is a reliable engine that provides ample horsepower to handle tough mowing conditions. Its efficient design allows for smooth operation and reduced fuel consumption, making it an economically sound choice for land management. The mower offers adjustable cutting heights, allowing users to select the appropriate length for different types of vegetation. This feature not only enhances cutting efficiency but also promotes healthier growth of the grass and plants left behind.

Another important aspect of the Bush Hog 1035 is the advanced cutting technology it utilizes. Equipped with high-quality, sharpened blades, the mower provides a clean and precise cut. The blades can be easily replaced or sharpened, ensuring consistent performance over time. Additionally, the mower's design minimizes clumping and promotes better debris dispersal, which is critical for maintaining an attractive landscape.

The Bush Hog 1035 is also designed for ease of use. Its intuitive controls and compact size make it maneuverable around obstacles, while the adjustable discharge chute directs grass clippings away from the cutting area, ensuring a tidy finish. The machine's low-profile design enhances stability on uneven ground, making it safer and easier to operate in challenging conditions.

Overall, the Bush Hog 1035 combines strength, efficiency, and user-friendly features, making it an excellent choice for anyone looking to manage their land effectively. Whether you are a professional landscaper or a homeowner with a large yard, the Bush Hog 1035 stands out as a reliable and effective tool for maintaining landscape health and appearance.
Top Page Image Contents