Bush Hog 1035 manual Equipment Operation Safety Instructions and Practices

Page 9
(SBH-9)
(SG-41)
(SL-19)
(SG-33)

SAFETY

Use extreme caution when getting onto the Implement to perform repairs, maintenance and when removing accumulated material. Only stand on solid flat surfaces to ensure good footing. Use a ladder or raised stand to access high spots which cannot be reached from ground level. Slipping and falling can cause serious injury or death.

Use extreme care when loading, carrying or handling any agricultural fertilizers, chemicals or biological residue. Follow the manufacturer’s handling instructions and wear appropriate Personal Protective Equipment including gloves, safety glasses and respirator when required. If you are using a tractor equipped with a cab, make sure the cab is rated for appropriate environmental exposure. Be safe and always wear proper protection. Short or long term exposure to certain chemicals and materials can result in serious injury or death.

Repeated or substantial breathing of hazardous dusts, including crystalline silica, could cause fatal or serious respiratory disease including silicosis. Concrete, masonry, many types of rock, and various other materials contain silica sand. California lists respirable crystalline silica as a substance known to cause cancer. Operation of this equipment under certain conditions may generate airborne dust particles that could contain crystalline silica. In those conditions, personal protective equipment including an appropriate respirator must be used. If excessive dust is generated, a dust collection or suppression system should also be used during operation.

SAFETY

Equipment Operation Safety Instructions and Practices

This Implement may be wider than the Tractor. Be careful when operating or transporting this equipment to prevent the Implement from running into or striking sign posts, guard rails, concrete abutments or other solid objects. Such an impact could cause the Implement and Tractor to pivot violently resulting in loss of steering control, serious injury, or even death. Never allow the Implement to contact obstacles. (S3PT-12)

Never grasp control levers when mounting the machine. (SBH-4)

The Boom is designed only to position and operate the Bucket which is attached to it. Never attempt to lift, pull, or push other solid objects with the boom or bucket. Serious injury could result from a structural failure when the Boom is used for purposes other than those for which it was designed.

1035 01/11

Safety Section 1-5

© 2011 Alamo Group Inc.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 1035 To the Owner/Operator/Dealer Warranty InformationTable of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety1035 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 1035 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices 1035 01/11 Safety Section Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesParts Information Decal Location Model LogoInstruct ReflctrModel Name Decal DescriptionD469 1035 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions AssemblyProper Ballasting and Wheel Spacing Dismounting and Mounting Mid-Mount Loader Dismounting Loader Mounting Loader Attaching Pin on Bucket Page Operation Section Operation GPM Standard Equipment and SpecificationsOperator Requirements Operation Personal Protective Equipment PPE Tractor RequirementsRops and Seat Belt Tractor Lighting and SMV EmblemTractor Ballast Boarding the Tractor Getting On and Off the TractorDismounting the Tractor Starting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection/Service Tractor Pre-Operation Inspection/ServiceMount Assembly Loader Boom Assembly Hydraulic Line InspectionBucket Inspection Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation SL-33 Operation Filling the Bucket Operating the LoaderLifting the Load Carrying the Load Lowering the Bucket Dumping the BucketLoading from a Bank Operating with Float ControlOperation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Operation Transporting on Public Roadways Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Page Maintenance Section Maintenance 1035 01/11 Maintenance Section Lubrication Schedule Adjusting Bucket Level Indicator Daily MaintenanceLift and Bucket Cylinder Disassembly Cylinder ServiceStorage Lift and Bucket Cylinder ReassemblyMaintenance Proper Torque for Fasteners Maintenance Maintenance Limited Warranty Required of the Operator Required of the OwnerSOM-01/11 Printed U.S.A

1035 specifications

The Bush Hog 1035 is a versatile and robust rotary mower designed for agricultural and landscaping applications. Renowned for its durability and efficiency, this model is widely used by farmers and landowners who require a reliable tool for managing heavy brush, grass, and other vegetation.

One of the standout features of the Bush Hog 1035 is its heavy-duty construction. Built with a reinforced frame and high-quality materials, this mower can withstand rigorous use in various terrains. The 1035 boasts a mowing width of 35 inches, making it ideal for tackling medium to large areas while efficiently cutting through dense underbrush and grass.

Powering the Bush Hog 1035 is a reliable engine that provides ample horsepower to handle tough mowing conditions. Its efficient design allows for smooth operation and reduced fuel consumption, making it an economically sound choice for land management. The mower offers adjustable cutting heights, allowing users to select the appropriate length for different types of vegetation. This feature not only enhances cutting efficiency but also promotes healthier growth of the grass and plants left behind.

Another important aspect of the Bush Hog 1035 is the advanced cutting technology it utilizes. Equipped with high-quality, sharpened blades, the mower provides a clean and precise cut. The blades can be easily replaced or sharpened, ensuring consistent performance over time. Additionally, the mower's design minimizes clumping and promotes better debris dispersal, which is critical for maintaining an attractive landscape.

The Bush Hog 1035 is also designed for ease of use. Its intuitive controls and compact size make it maneuverable around obstacles, while the adjustable discharge chute directs grass clippings away from the cutting area, ensuring a tidy finish. The machine's low-profile design enhances stability on uneven ground, making it safer and easier to operate in challenging conditions.

Overall, the Bush Hog 1035 combines strength, efficiency, and user-friendly features, making it an excellent choice for anyone looking to manage their land effectively. Whether you are a professional landscaper or a homeowner with a large yard, the Bush Hog 1035 stands out as a reliable and effective tool for maintaining landscape health and appearance.
Top Page Image Contents