Bush Hog Complete Guide for ATH and FTH Finish Mowers - Specs, Safety, and Parts Diagrams

ATH / FTHOperator’sFINISHINGManual MOWER

TABLE OF CONTENTS

SECTION/PARA		PAGE
	Warranty	. . . . .2
	Dealer Preparation Check List . . . .	. . . . .3
	Safety Precautions	. . . . .4
	Federal Laws and Regulations . . . .	. . . . .5
I	INTRODUCTION AND DESCRIPTION . .6
	1-1 Introduction	. . . . .6
	1-2 Description	. . . . .6
II	PREPARATION FOR USE	. . . . .7
	2-1 Attaching to Tractor	. . . . .7
III	OPERATING INSTRUCTIONS . . . .	. . . . .9
	3-1 General Safety	. . . . .9
	3-2 Cutting Height Adjustment	. . . . .9
	3-3 Operation	. . . . .9
	3-4 Transporting	. . . . .9

SECTION/PARA			PAGE
IV	MAINTENANCE		. . . .10
	4-1 Maintenance Check List		. . . .10
	4-2 Lubrication		. . . .10
	4-3 Belt Adjustment		. . . .11
	4-4	Belt Replacement	. . . .11
	4-5	Blade Replacement	. . . .12
	4-6	Troubleshooting	. . . .12
V	DEALER ASSEMBLY		. . . .13
	5-1	Base Unit Assembly	. . . .13
	Safety Decals		. . . .15
	Torque Specifications		. . . .16

RETAIL CUSTOMER’S RESPONSIBILITY UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for travel- ing to or hauling of the product for the purpose of performing a warranty obligation or inspection.

1