Bush Hog Commercial Series manual Tighten retaining bolt to 76 ft./lbs

Page 18

1.ENGINE:

For complete maintenance and operating infor- mation for your engine, please refer to your engine operating and maintenance instructions furnished by the engine manufacturer and included in your Zero Turn mower information packet.

NOTE

Air intake screen must be kept clean. If plugged, engine may be seriously dam- aged by over heating.

2.TACHOMETER / HOURMETER

The tachometer / hourmeter includes a FlashAlert feature to remind you to change engine oil and filter at recommended inter- vals. The tachometer displays engine rpm when the engine is running and elapsed time in hours when the engine is turned off.

Oil Change Flash Alert - Break-in interval at 5 hours with 1 hour before and after flash. Normal interval at 50 hours with 2 hour before and after flash.

3.BATTERY:

When taking the battery out of the mower for servicing, make sure to reconnect the cables to the battery exactly as they were prior to removal.

Keep the battery clean. Remove the corrosion around the battery terminals by applying a solu- tion of one part baking soda to four parts water. Coat all exposed terminal surfaces with a light layer of grease or petroleum jelly to prevent corrosion.

NOTE

At temperatures below 32 degrees F (0 deg

C)the full charge state must be maintained to prevent cell electrolyte from freezing and causing permanent battery damage.

WARNING

AVOID SERIOUS INJURY OR DEATH:

●THE BATTERY CONTAINS SULFURIC ACID. AVOID CONTACT WITH SKIN, EYES OR CLOTHING. EYES - FLUSH WITH WATER AND GET PROMPT MED- ICALATTENTION.

ANTIDOTE: INTERNAL - DRINK LARGE QUANTITIES OF WATER OR MILK. FOLLOW WITH MILK OF MAG- NESIA, BEATEN EGG OR VEGETABLE OIL. CALL A PHYSICIAN IMMEDIATELY.

●BATTERIES PRODUCE EXPLOSIVE GASES. KEEP SPARKS, FLAMES AND SMOKING MATERI- ALS AWAY. VENTILATE WHEN CHARGING IN AN ENCLOSED SPACE. WEAR EYE PROTECTION WHEN WORKING NEAR BATTERIES.

●KEEP OUT OF REACH OF CHILDREN.

4.TIRES:

Correct tire pressure is essential for efficient operation of the mower. Check tire air pres- sure periodically. Inflate front and rear tires to 15 psi.

Lug bolts should be checked regularly for tight- ness. Torque lug bolts to 50 ft./lbs. The center hub nut should be torqued to 175 - 200 ft./lbs. and cotter key installed.

5.MOWER BLADES:

Check sharpness of mower blades after every 10 hours of operation. To sharpen blades proceed as

follows:

WARNING

WHEN IT IS NECESSARY TO RAISE THE DECK OR MOWER FOR SERVICE OR MAINTENANCE, TO AVOID SERIOUS INJURY OR DEATH, STOP ENGINE, SET PARKING BRAKE, REMOVE IGNI- TION KEY AND SPARK PLUG WIRES AND SECURELY SUPPORT THE DECK OR MOWER BEFORE WORKING UNDERNEATH.

A. Lift deck and secure in raised position.

B. Remove bolt, cup washer, and blade from shaft. C Blades should be discarded when worn exces- sively. See sketch.

New Blade

 

 

 

 

Dangerous!

 

 

When Notch Starts

 

25 Degrees

 

 

 

 

 

 

 

 

 

 

 

 

D. Sharpen blade with a hand file, electric grinder or blade sharpener. Wear gloves and eye protection when sharpening. Grind blade at original bevel.

E. Check balance of blade by positioning the blade on a nail or blade balance pedestal. Grind the blade on the end that is heavier until both sides balance.

F. Install blades with the concave side of the cup washer against blade. Be sure blades are installed with uplifts and cutting edges in the proper directions.

Tighten retaining bolt to 76 ft./lbs.

WARNING

WHEN IT IS NECESSARY TO RAISE THE DECK OR MOWER FOR SERVICE OR MAINTENANCE, TO AVOID SERIOUS INJURY OR DEATH, STOP ENGINE, SET PARKING BRAKE, REMOVE IGNI- TION KEY AND SPARK PLUG WIRES AND SECURELY SUPPORT THE DECK OR MOWER BEFORE WORKING UNDERNEATH.

6. CLEANING GRASS BUILD UP UNDER DECK

Depress the deck lift foot pedal and lock in position, then move the height adjustment pin to the 5” position.

Lift the front of the unit and support unit securely.

Clean out any grass build up from underside of deck and in deck discharge chute.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Bush HOG Congratulations Table of Contents Retail CUSTOMER’S Responsibility Under the Bush HOG WarrantyThis Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List Commercial Zero Turn Riding MowerSafety Alert Symbol Your Safety is InvolvedImportant Safety Precautions Accident Patterns to AvoidSafety Never Carry PassengersTowing Slope OperationOsha Regulations EMPLOYERS, Employees and OperationsThis Act Seeks Child Labor Under 16 Years OldSection Introduction and Description IntroductionDescription Controls Tractor SpecificationsDeck Specifications Operator Interlock SystemSection Operation General SafetyPRE-OPERATION Checklist Do not mix oil with gasolineOperation Cutting Height Adjustment DecalCutting Height Adjustment CautonANTI-SCALP Roller or Caster Adjustment ANTI-SCALP RollerMowing Recommendations Hr break-in Grease blade spindles every 50 hours Section MaintenanceMaintenance Schedule Important Substitution of an improper filter will causeTighten retaining bolt to 76 ft./lbs Motion Control Steering Adjustment Drive AdjustmentsMotion Control Lever Adjustment Stop the Engine Before Making AdjustmentsLeveling the Deck Deck Belt AdjustmentDeck Spindle Belt Routing Diagram Counterbalance SpringHydrostatic Maintenance START-UP MaintenanceSTART-UP Procedure Parking Brake AdjustmentTroubleshooting Check List Section IV Assembly Kawasaki Engine Wiring Harness Kohler Engine Wiring Harness Safety Decals Rotating Drive Parts BeneathTo Avoid Serious Injury or Death Torque Specifications Recommended Torque in Foot Pounds Newton MetersOptional Equipment Slope Angle Guide Fold Along Appropriate Line

Commercial Series specifications

Bush Hog has long been synonymous with durability and efficiency in agricultural equipment, and the Bush Hog Commercial Series takes that reputation to the next level. Designed for professionals in the landscaping, agriculture, and construction sectors, this series offers innovative features and advanced technologies that ensure high performance and reliability in tough working conditions.

At the heart of the Bush Hog Commercial Series is its robust construction. Each model is built with heavy-duty materials to withstand the challenges of demanding environments. Whether you are mowing large fields or tackling tough brush, these machines are engineered to provide consistent results day after day. The reinforced decks and frames are designed to minimize wear and tear, extending the lifespan of the equipment and enhancing its resale value.

One standout characteristic of the Commercial Series is the engineering that goes into its cutting systems. The unique blade design delivers a superior cut while reducing the amount of horsepower required, making the machines more efficient and fuel-efficient. The patented blade technology also ensures smooth operation, minimizing downtime from maintenance.

Furthermore, the Bush Hog Commercial Series incorporates advanced technology for added convenience and safety. Features such as adjustable cutting heights provide users with the flexibility needed to adapt to various terrain and vegetation types. Electric lift options help reduce operator fatigue during extended use, while the ergonomic design of the controls ensures ease of operation.

The series is also equipped with user-friendly maintenance features. Quick-access grease points and a simplified belt system service allow operators to spend less time on upkeep and more time getting work done. This focus on easy maintenance is part of Bush Hog's commitment to keeping your equipment running smoothly and efficiently.

In terms of performance, the Commercial Series units are powered by reliable engines that deliver strong torque and speed, allowing for quick job completion without sacrificing quality. The rugged tires provide excellent traction, enabling these machines to navigate various terrains with ease.

In conclusion, the Bush Hog Commercial Series stands out in the marketplace for its combination of durability, performance, and advanced engineering. With a suite of features tailored for professionals, this series promises to meet the rigors of any landscape, construction, or agricultural project, allowing operators to achieve optimal results while enjoying the benefits of high-quality equipment. Whether users need to maintain pristine lawns or clear overgrown brush, the Bush Hog Commercial Series is ready to rise to the occasion.
Top Page Image Contents